AX501最新3.6x版英文操作手册 - 第30页

4022 593 51894 Operatin g Manu al 09.01 AX-301/501, AX-3/5 30 7 CHAPTER 7 F e eder s and pr epar ations NOTE: In case of an error call for assistance. T o maximize produ ction time it is importa nt t o prepar e for a cha…

4022 593 51894 Operating Manual

09.01 AX-301/501, AX-3/5 29

CHAPTER 6 Run current program

Figure 33 Run placement program

•

Select ’Programs’ (1).

• Select desired placement program (2).

• Select ’Run’ (3).

• Confirm selection (4).

Figure 34 Placement program activated

4022 593 51894 Operating Manual

09.01 AX-301/501, AX-3/5 30

CHAPTER 7 Feeders and preparations

NOTE: In case of an error call for assistance.

To maximize production time it is important to prepare for a change over

in advance.

Items to be checked or prepared:

1 Toolbits, availability

2 Placement program, availability

3 Prepared board support plates, availability,

see User Reference Manual, to prepare them.

4 Prepared feeders, availability

see feeder operating manual, to prepare them.

5 Trolleys with the feeders at the correct places.

4022 593 51894 Operating Manual

09.01 AX-301/501, AX-3/5 31

CHAPTER 8 New program selection

In case of an error, see chapter 10. Error Handling

NOTE: To maximize production time it is important to prepare for

a change over in advance, see CHAPTER 7.

8.1 Select the new placement program

Figure 35 New placement program selection

Figure 36 New placement program selection

1 Select ’Programs’ (1).

2 Select ’Load’ to open the ’Load programs’ screen (2).

3 Select source drive (3).

4 Select desired program (4).

5 Confirm by ’OK’ (5).