00198521-01_UM_LDU_E_EN.pdf - 第41页

4 Operation 4.5 Fitting User Manual SIPLACE Linear Dipping Unit E 12/2018 41 4.5 Fitting Before filling in the flux, you have to fit all the parts of the LDU. You will be guided through this pro- cess by the station soft…

4 Operation

4.4 Starting a reference run

40 User Manual SIPLACE Linear Dipping Unit E 12/2018

4.4 Starting a reference run

After logging on, it is mandatory to perform a reference run so that the LDU can be set up and

used. During the reference run the axes are initialized. In the process, the end positions of the axes

are determined and moved to a defined position.

Requirements:

●

The squeegee must be positioned over the park plate at the rear fixed stop.

► If required, push the squeegee manually over the park plate to the rear fixed stop.

► In the station software, select the Setup

view(1) and then the Locations area (2).

► Select the Table (3) on which the LDU is

set up.

► Select the icon of the LDU(1).

► Click on the Settings... button (2).

► Select the Dipping area tab (1).

► Click on the Reference run button (2).

The LDU performs a reference run.

4 Operation

4.5 Fitting

User Manual SIPLACE Linear Dipping Unit E 12/2018 41

4.5 Fitting

Before filling in the flux, you have to fit all the parts of the LDU. You will be guided through this pro-

cess by the station software.

NOTICE

Observe the exact order

It is important to perform the steps for fitting the parts in the order described here.

► In the station software, select the Setup

view(1) and then the Locations area (2).

► Select the Table (3) on which the LDU is

set up.

► Select the icon of the LDU(1).

► Click on the Settings... button (2).

► Select the Cleaning tab.

4 Operation

4.5 Fitting

42 User Manual SIPLACE Linear Dipping Unit E 12/2018

Fitting the drip tray and the park plate

Prerequisites: The park plate and the drip tray are not yet fitted.

► Click on the Fit drip tray and park plate

button.

(1) The LDU moves the squeegee axis to the

front over the lift axis.

► (2) Fit the drip tray.

► Fit the park plate.