SG_FSE_SiplaceHF_HF3_00193901-05_eng - 第3页
1 - 1 S tudent Guide SIPLACE HF/HF3 Edition 09/2005 Course introduction SIPLACE HF/HF3 T raining for FSE‘s 1 Course introduction SIPLACE HF/HF3 T raining for FSE‘s This documentation will lead you through the SIPLACE HF …
(The reproduction, transmission or use of this document or its
contents is not permitted without written authority.
Offenders will be liable for damages. All rights, including rights
created by patent grant or registration of a utility model or design,
are reserved.)
(We have checked the contents of the printed documentation to
ensure that it is in agreement with the hardware and software
described therein. However, since discrepancies cannot be ruled out,
we cannot assume responsibility for complete agreement.
The information given in this printed documentation is however
regularly reviewed and necessary corrections included in
subsequent editions.
We would appreciate any suggestions for improvements.)
Siemens AG 2002 All rights reserved Subject to change without prior notice
Order No.: 00193901-05 Siemens Aktiengesellschaft
To be ordered from:
SIEMENS Dematic AG SD EA 1 SMSE PLMT
Rupert-Mayer-Strasse 44
D - 81359 Muenchen
Printed in the Federal Republic of Germany.
UNIX is a trade mark of AT&T
Windows is a trade mark of Microsoft
1 - 1
Student Guide SIPLACE HF/HF3
Edition 09/2005 Course introduction SIPLACE HF/HF3 Training for FSE‘s
1
Course introduction
SIPLACE HF/HF3 Training for FSE‘s
This documentation will lead you through the SIPLACE HF/HF3 training for FSE‘s.
Course duration: 10 Days
Prerequisites
SIPLACE S25HM / HS-50 Training
SIPLACE Pro Programming Training
FSE Laptops with executable Service Tools
Target Group
SIPLACE service personnel
SIPLACE setup engineers
Course Objectives
The participants know the different parts of a SIPLACE HF/HF3 and their specific function. They
are able to operate the SITEST software, can perform parts replacement according to spare parts
definition and following adjustments as well as a machine calibration. They understand the func-
tional relations and the machine principles in detail and can thus locate and eliminate machine er-
rors. He can perform the head modularity and knows the MTC2 option on the SIPLACE HF/HF3.
1 - 2
Student Guide
Course Contents Edition 09/2005
2
Course Contents
Introduction
– General Introduction
– Curriculum of the course
– Requirements of the participants
SIPLACE Safety Considerations
– SIPLACE Safety Instructions
– Safety equipment
– Energy state and residual voltages after switching off the main switch
– Disabling the compressed air Supply
– ESD guidelines
Machine overview
– Overall View
– Machine options
– Power supply and pneumatic, cage, Axis and computer unit
– Placement heads and nozzle changer
– Feeder tables and tape cutter
– Control structure
Machine Reference Run
Demonstration and explanation of a reference run
Placement Sequence
– Demonstration and explanation the placement sequence
– Pick-up and placement cycle of the C&P head
– Pick up and placement cycle of the Twin head
Communication and control
– Overview Network and Network addresses
– LAN Network
– Communication on the HF/HF3 machine
– CAN Bus communication Axis control and vision system
– General overview track signals and axis dynamic SIPLACE-LAN