SG_FSE_SiplaceHF_HF3_00193901-05_eng - 第379页

1 - 1 1 S tudent Guide SIPLACE HF/HF3 Edition 09/2005 8 Component handling 11 8.2.4.2 Compressed air supply for Bulkcase feeder Bulkcase feeder need for operation p ressure air supply . So this pressure air supply is off…

100%1 / 596
1 - 10
Student Guide SIPLACE HF/HF3
8 Component handling Edition 09/2005
10
8.2.4 Optionally extension on the COT
8.2.4.1 Tape reel holder for the 3th reel at the 3x8mm S-Feeder
When using 3x8mm S-Feeder it would be necessary to install the tape reel holder for the3th pick
up track on the COT. The option allows unwinding of the tape easily and decrease machine
stoppage.
The adapter plate (Pos. 1) is fixed inside the COT with four screws. The adapter plate for the tape
reel holder will be mounted under the communication unit. In this mechanical device hang up the
holder for the 3th tape reel.
Fig. 8.2 - 7 Tape reel holder on the COT(left) / Mechanical device for the tape reel holder (right)
Legend
(1)Adapter plate 2. Tape reel holder
3. Idler pulley, shortened
1 - 11
Student Guide SIPLACE HF/HF3
Edition 09/2005 8 Component handling
11
8.2.4.2 Compressed air supply for Bulkcase feeder
Bulkcase feeder need for operation pressure air supply. So this pressure air supply is offered as
an option .
it is easy to mount. First remove the bung (Pos. 1) at pressure air hose in the feeder table (Pos.
2). Than the pneumatic supply for the bulck case feeder is mounted (Pos. 3) with 2 screws DIN
912, M8x20 (Pos. 4) on the component table (Pos. 2). At the rear side of the airkiss supply unit
are feeder clamps mounted (Pos. 5). This clamps keep the Bulkcase-feeder down correctly sealed
to the pressure air supply.
Fig. 8.2 - 8 Unit for bulkcase feeder
Legend
(1)Bung at component table 2. Componnent table
3. Pressure air supply for Bulkcase-Feeder 4. Screw DIN 912, M8x20
5. clamps for bulkcase feeder
1 - 12
Student Guide SIPLACE HF/HF3
8 Component handling Edition 09/2005
12
8.2.4.3 Additional feeder fixation
The Feeder-Fixing is an additional mechanical safety precaution. It prevent to move the feeder at
the component table by accident. It exclude a head crash risk with a wrong positioned feeder.
The feeder-fixation is is mounted on the front side of the component table. The clamp lock the front
feeder stand. Forthe full set up of this option each feeder table get such a clamp.
Fig. 8.2 - 9 COT feeder fixation
Legend
(1)Feeder fixation 2. Component table