SG_FSE_SiplaceHF_HF3_00193901-05_eng - 第431页
1 - 3 S tudent Guide SIPLACE HF/HF3 Edition 09/2005 10 Sitest 3 10.1.2 St arting/T erminating the T est Program 10.1.2.1 St arting ➠ On the user in terface for the station, click on the icon (see User ’s Manual SIPLACE H…
1 - 2
Student Guide SIPLACE HF/HF3
10 Sitest Edition 09/2005
2
10.1.1 Overview user interface Sitest (SW 504.xx)
Main view [F1]
(Portal 2 nur S-20/S-23 HM)
RV head 2 ...
Mode
Exit - Esc
Shut down computer...
Main view - F1
View
Error - F2
Gantries - F3
RV heads - F4
PCB conveyor - F6
Tables - F7
MTC - F8
Inputs/outputs - F9
Cycle mode... - Alt+T
PCB camera P1 - Alt+1
General functions
RV camera P1 - Alt+2
IC camera P1 - Alt+3
FC camera P1 - Alt+4
Settings
Access level...
Save machine data
Copy machine data...
Firmware download ...
Machine configuration...
Head exchange
Language
RV head 1 ...
German
English
French
Help
Contents - Ctrl+Alt+F1
Help - Alt+F1
Use Help
Info ...
[F2]
Errors
Track errors
Machine errors
Transport errors
General errors
[F3]
Gantry functions
Gantries
Axes functions
Calibrate position
PCB mapping
PCB camera
functions
[F4]
Revolver heads
Functions
Axes
Holding/reject circuit/
turning station
Placement and pick-up
circuit
RV mapping
RV head and camera
Nozzle changer
head functions
Nozzle changer
magazine functions
[F6]
[F7]
Tables
Functions
Calibrate pick-up
position
[F8]
MTC
Functions
Tower functions
Axes
Settings
Machine data
Inputs/outputs 1
Inputs/outputs 2
[F9]
Inputs/outputs
In- and outputs
User interface SITEST Version 504.xx
SIPLACE HF Issue 02/2002
PCB camera P2 - Alt+5
RV camera P2 - Alt+6
IC camera P2 - Alt+7
FC camera P2 - Alt+8
Italian
Revolver head
component sensor
PCB conveyor
PCB transport functions
Adjust and measure
PCB conveyor width
Adjust and test
conveyor speed
Adjust and test
conveyor speed
[F5]
Twin Head
Functions
Axes
Head Board
IC camera
FC camera
Calibrate twin head
TH mapping
Nozzle changer
head functions
Nozzle changer
magazine functions
Twin head - F5
1 - 3
Student Guide SIPLACE HF/HF3
Edition 09/2005 10 Sitest
3
10.1.2 Starting/Terminating the Test Program
10.1.2.1 Starting
➠ On the user interface for the station, click on the icon (see User’s Manual SIPLACE HF/
HF3) The test program is started.
Fig 7.1 - 1 Confirmation "Start Sitest"
The main view of the user interface of the test program will appear on the screen shortly after-
wards.
➠ Select the desired language .
10.1.2.2 Terminating
There are three ways of properly terminating the test program, i.e. either
– from the main view via the
Mode menu, by selecting the menu command Exit ,
– using the key
ESC
– or by proceeding as described in the following.
Note:
Only the key ESC permits the test program to be terminated from any view.
➠ In the main view, click on the icon.
1 - 4
Student Guide SIPLACE HF/HF3
10 Sitest Edition 09/2005
4
Note:
If newly determined or edited machine data have not been saved yet, an appropriate message will
be displayed before exiting the program prompting you to save the data (see example below).
➠ Click on the Yes button in the dialog box if you wish to save the data on terminating the test
program, or click on
No if you do not wish to save the data.
The following dialog box opens.
➠ Click on the Yes button. The test program is terminated.