SG_FSE_SiplaceHF_HF3_00193901-05_eng - 第5页
1 - 3 S tudent Guide SIPLACE HF/HF3 Edition 09/2005 Course Contents 3 Services to the machin e – Explanation of the units and part s in the power supply cage and p neumatic cage – Explanation of the function of the parts…
1 - 2
Student Guide
Course Contents Edition 09/2005
2
Course Contents
Introduction
– General Introduction
– Curriculum of the course
– Requirements of the participants
SIPLACE Safety Considerations
– SIPLACE Safety Instructions
– Safety equipment
– Energy state and residual voltages after switching off the main switch
– Disabling the compressed air Supply
– ESD guidelines
Machine overview
– Overall View
– Machine options
– Power supply and pneumatic, cage, Axis and computer unit
– Placement heads and nozzle changer
– Feeder tables and tape cutter
– Control structure
Machine Reference Run
Demonstration and explanation of a reference run
Placement Sequence
– Demonstration and explanation the placement sequence
– Pick-up and placement cycle of the C&P head
– Pick up and placement cycle of the Twin head
Communication and control
– Overview Network and Network addresses
– LAN Network
– Communication on the HF/HF3 machine
– CAN Bus communication Axis control and vision system
– General overview track signals and axis dynamic SIPLACE-LAN
1 - 3
Student Guide SIPLACE HF/HF3
Edition 09/2005 Course Contents
3
Services to the machine
– Explanation of the units and parts in the power supply cage and pneumatic cage
– Explanation of the function of the parts in the sectors
Gantry
– General setup and functionality of the gantry ,mechanical structure of the X- and Y-Axes
– Spare part replacement and adjustment work at the gantry axis
– Axis controlling and positioning of the gantry axis
Collect & Place head
– General Overview
– Removing the front part of the C&P head
– Overview front part of the head
– Dis- and reassembly of spare parts at the front part
– Spare part replacement on the head back part
– Vacuum system
– Explanation of vacuum- / air blow system
– Remount C&P head
– Adjustment of the air blow at reject and placement circuit
– Adjustment of the zero point correction star axis
– Axis controlling and positioning of the star axis
– Axis controlling and positioning of the Z-axis
– Axis controlling and positioning of the DP-axis
– Differentiation between DLM1 and DLM2 C&P placement heads
Twin Head
– Position and environment of the Twin head
– Structure and functional groups of the Twin head
– Disassembly and assembly of the Twin head
– Spare part replacement and adjustments at the Twin head
– Axis controlling and positioning of the twin head axis
– Vacuum system
– Axis controlling and positioning of the Z-axis
– Axis controlling and positioning of the D-axis
1 - 4
Student Guide
Course Contents Edition 09/2005
4
Component handling
– General information
– Preparation and removal of the Tape cutter
– Cutter blade and spare part exchange on the tape cutter
– Reinstallation of the tape cutter
– Functional check in the machine
Pneumatic Tape cutter (Docking unit):
– General information
– Preparation and removal of the Tape cutter
– Reinstallation of the tape cutter
– Functional check in the machine
Calibration (Sitest)
– Start / Terminating the SITEST
– Components of the User Interface
– User Interface Displays
– Overview of the machine calibration
– Zero Point Corrections on the C&P and P&P heads
– Carry out the Calibration with single calibration menus
– Complete Machine Calibration incl. vacuum check and air kiss adjustment
Transport system:
– General Information and technical data about single and dual conveyor
– Mechanical structure and functionality of the conveyor
– Electrically structure and communication to the machine via the transport control board
– Spare part replacement and adjustment work at the conveyor
– Calibrate the conveyor edges