SG_FSE_SiplaceHF_HF3_00193901-05_eng - 第577页
1 - 2 S tudent Guide SIPLACE HF/HF3 Contents Edition 09/2005 2
Student Guide SIPLACE HF/HF3
Edition 09/2005 Contents
1
Chapter
Table of Contents
20 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
20.1 Using the SIPLACE Axis Tester ’SAT’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
20.1.1 General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
20.1.1.1 Programming Buttons and Functions During SAT Booting . . . . . . . . . . . . . . . . 3
20.2 Flow Diagrams for Key ’SAT’ Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
20.3 ’SAT’ Machine Testing Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
20.3.1 Exit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
20.3.2 Testing Track Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
20.3.2.1 Displaying the Track Signals at the Axis Controller Input. . . . . . . . . . . . . . . . . . 6
20.3.2.2 Testing Track Signals/Zero Pulse after a Gantry Axis Reference Run. . . . . . . . 6
20.3.2.3 Displaying the Axis Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
20.3.3 Assessing the Axis Dynamic Signal (also for ’Beginner’Mode). . . . . . . . . . . . . . . . 10
20.3.3.1 Default Terminal Assignment of SAT BNC Outputs for Assessment of Dynamics 10
20.3.3.2 SIPLACE Axis Tester ’SAT’ Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
20.3.3.3 Positioning Time Submenus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
20.3.3.4 Overspeed Menu for Assessment of Axis Dynamic . . . . . . . . . . . . . . . . . . . . . 13
20.3.3.5 System Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
20.4 Software combinations SIPLACE HF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
20.5 Overview basic setting SIPLACE HF-machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
20.5.1 Pneumatics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
20.5.2 Overview on other settings for HM-machines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
20.5.3 Overview to the measuring systems ’HF’-Machines . . . . . . . . . . . . . . . . . . . . . . . . 18
20.5.4 Overview to the Conveyor systems ’HM’-Machines . . . . . . . . . . . . . . . . . . . . . . . . 19
20.5.5 Overview on Axis settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
20.5.6 Dynamic settings Gantry axes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
1 - 2
Student Guide SIPLACE HF/HF3
Contents Edition 09/2005
2
SIPLACE HF/HF3 Edition 09/2005
Appendix
3
20 Appendix
20.1 Using the SIPLACE Axis Tester ’SAT’
20.1.1 General Information
The SIPLACE Axis Tester has an integrated screen saver. If the program is not used for several
minutes (15) the screen saver will activate and show an increasing number of "stars". (The posi-
tion deviation signal at the BNC output will be switched to ’0’). As soon as the operator presses
any key, ’SAT’ will reactivate and display the menu last used.
The cursor is moved by "scrolling" in a particular direction. This means, that when the cursor is in
the topmost position of ’Cursor UP’, the bottommost menu will be selected and when it is moved
to the far left of the screen with ’Cursor LEFT’, the menu on the right will be chosen and vice versa.
20.1.1.1 Programming Buttons and Functions During SAT Booting
During booting, the ’SAT’ performs a so-called self-test i.e. the device tests itself and the internal
voltage values in the axis controller module. If the deviation is 5% (standard setting) or more, a
warning will be issued. The following settings can be modified during booting.
SAT’ ’Restart
Press B1 B3 and B5 simultaneously
’SAT’ will be reset/rebooted.
Return to Expert mode
Select ’User
level’ and ’Expert’ mode after confirming
the selection the system reboot in the
selected mode.
Fig. 20.1 - 1’SAT’ operating menu during system
boot
20.2 Flow Diagrams for Key ’SAT’ Menus
The following page shows an overview Fig. 20.2 - 1 - in Expert mode - of the configuration menus
required for track signal test, axis dynamics tests and adjustment. Each menu will then be ex-
plained in detail.
B1 B2 B3 B4 B5