SG_FSE_SiplaceHF_HF3_00193901-05_eng - 第7页
1 - 5 S tudent Guide SIPLACE HF/HF3 Edition 09/2005 Course Contents 5 Head modularity: – Reasons for and sequence of the hea d exchange – Exchange the placemen t head with component camera – Exchange of the no zzle chang…
1 - 4
Student Guide
Course Contents Edition 09/2005
4
Component handling
– General information
– Preparation and removal of the Tape cutter
– Cutter blade and spare part exchange on the tape cutter
– Reinstallation of the tape cutter
– Functional check in the machine
Pneumatic Tape cutter (Docking unit):
– General information
– Preparation and removal of the Tape cutter
– Reinstallation of the tape cutter
– Functional check in the machine
Calibration (Sitest)
– Start / Terminating the SITEST
– Components of the User Interface
– User Interface Displays
– Overview of the machine calibration
– Zero Point Corrections on the C&P and P&P heads
– Carry out the Calibration with single calibration menus
– Complete Machine Calibration incl. vacuum check and air kiss adjustment
Transport system:
– General Information and technical data about single and dual conveyor
– Mechanical structure and functionality of the conveyor
– Electrically structure and communication to the machine via the transport control board
– Spare part replacement and adjustment work at the conveyor
– Calibrate the conveyor edges
1 - 5
Student Guide SIPLACE HF/HF3
Edition 09/2005 Course Contents
5
Head modularity:
– Reasons for and sequence of the head exchange
– Exchange the placement head with component camera
– Exchange of the nozzle changer
– Configuration at SIPLACE Pro and in SITEST
– Zero point corrections
– Calibration of the "new machine"
– Fine calibration at the "new machine"
– Run 1st placement program at the "new machine"
Matrix Tray Changer 2:
– General Information
– MTC 2 specific safety instruction
– Parts overview of the machine (terminology)
– Adjustment the basic level and adjustment of the MTC into the machine
– Preparation, removal and installation of MTC
– Communication between HF/HF3 and MTC 2
– Placement function MTC 2
– Single function MTC 2
– Reference Run of the MTC 2
– Calibration and adjustment of positions on the feed and lift axis
– Machine data
Preventive Maintenance
– Maintenance Schedule
– Equipment and tools needed for MaintenanceMaintenance work every shift
– Maintenance work every week
– Maintenance work every month
– Maintenance work every 2 month
– Maintenance work every year
– Maintain the sleeves
– Maintain the valve plungers
1 - 6
Student Guide
Course Contents Edition 09/2005
6
Installation:
– Setting up and leveling a SIPLACE HF/HF3
– Installation of the machine software 504.x
Troubleshooting
– Check list to start the machine troubleshooting
– Overview of LED's used throughout the machine
– Common machine problems
– Common program related problems
– Testing and monitoring the status of the head board functions
– Threshold values of vacuum check
– Testing Input / Output functions