00198158-01_AI_Speed_Config_RV12_NC_EN - 第22页
Speed (Single-Sided) DLM-RV12 - Option 2 Installation Procedures 22 Assembly Instructions E by SIPLACE
Speed (Single-Sided) DLM-RV12 - Option 2
Installation Procedures
Assembly Instructions E by SIPLACE 21
► Remove the "Top panel cover 3" [03106628
-
xx] (1) in location 2.
► Connect the cable of the "Module, sensor, reject box Loc2" [03102729
-
xx] (3) to the "Cable ext reject
box sensor Loc2" [03102692
-
xx].
► Run the cable through the opening (2) of the top panel cover.
► Refit the cover to the machine frame.
► Place the "Reject bin small" [03109739
-
xx] (2) into the "Reject bin holder" [03110727
-
xx] (1) key
holes.
Speed (Single-Sided) DLM-RV12 - Option 2
Installation Procedures
22 Assembly Instructions E by SIPLACE
Speed (Double-Sided) DLM-RV12 - Option 1
Assembly Instructions E by SIPLACE 23
4
4 Speed (Double-Sided) DLM-RV12 - Option 1
Speed (Double-Sided) DLM-RV12 - Option 1
A standard double sided machine includes two "NC Speed kit reject bins small" [03113189
-
xx] (one each
in location 1 and location 2), a "Module sensor reject box Loc1" [03103405
-
xx], and a "Module sensor
reject box Loc2" [03102729
-
xx].
"NC SPEED RV12 LOC 1 cpl." [03113197
-
xx] is located at the highlighted area.
▪ It consists of a single row nozzle changer [03106322
-
xx] base plate with four active nozzle maga
-
zines [03081446
-
xx] as shown above.
▪ For an upgrade in the field, the height measurement block SPEED [03119428 xx] must also be or
-
dered.
Nozzle maga zine type 30xx fo r RV12 [03081446-xx]
Height measurement block SPEED [03119428-xx]
STANDARD SPEED (DS) RV12 SPEED (DS) RV12 OPTION 1
1 Location 1 2 Location 2
Active nozzle magazine type (quick reference)
▪ Nozzle magazine type 30xx for RV12
[03081446
-
xx]
Height measurement block SPEED [03119428
-
xx]