00198158-01_AI_Speed_Config_RV12_NC_EN - 第28页

Speed (Double-Sided) DLM-RV12 - Option 2 Installation Procedures 28 Assembly Instructions E by SIPLACE ► Place the required shims (1) underneath the shim cover and fasten them with an M3 x8 counte r sunk screw. The mac h…

Speed (Double-Sided) DLM-RV12 - Option 2

Installation Procedures

Assembly Instructions E by SIPLACE 27

► Mount one shim cover [03108393

xx] each on "NC mounting bracket Speed left" [03108126

xx] and

"NC mounting bracket Speed" right [03108035

xx].

► Place the "Height measurement block SPEED" [03119428

xx] onto the shim cover and move the

head holder manually toward the block with care.

► Use a feeler gauge to determine the gap and the number of "NC shims" [03108395

xx] required.

Speed (Double-Sided) DLM-RV12 - Option 2

Installation Procedures

28 Assembly Instructions E by SIPLACE

► Place the required shims (1) underneath the shim cover and fasten them with an M3x8 countersunk

screw.

The machine can only accommodate one nozzle station (3) in location 1 (1). There is no nozzle station

in location 2 (2).

The reject bin in location 1 collects both rejected components and rejected nozzles. The reject bin in lo

cation 2 reject bin only collects rejected components.

Speed (Double-Sided) DLM-RV12 - Option 2

Installation Procedures

Assembly Instructions E by SIPLACE 29

► Place the "NC single row for DLM4 RV6/12, C&P14 P" [03106322

xx] onto the shim covers and fas

ten it with four M5x14 cap screws.

► Install the active nozzle magazines (1).