TR7500_Hardware_en - 第18页

17 F i gu r e 2 . 1 2 S t e p p i n g 2 . 4 . 5 I N L I N E : P o r t 1 an d P o r t 2 c a n b e u s e d t o pe r f o r m a s e l f - d i agn o s t i c c he c k . C o n n e c t P o r t 1 a n d P o r t 2 c on n e c t o r …

100%1 / 87
16
Figure 2.7 Input 2
2.4.2 OUTPUT(Y): The Y100~Y120 values from Figure 2.8 ~ Figure 2.10 can be compared
against Table 2.1 to monitor the PLC to see if the output points are normal.
Figure 2.8 Output 1
Figure 2.9 Output 2
Figure 2.10 Output 3
2.4.3 PC & PLC I/O: Use this function and co-operate with the I/O testing function in main
program to review the Input and Output signal.
Figure 2.11 PC&PLC I/O
2.4.4 STEP (S): When step by step operation is selected, the step at which the system’s
operation experiences a problem can be identified; this is shown during system Reset,
Bypass and normal operations.
17
Figure 2.12 Stepping
2.4.5 INLINE: Port1 and Port2 can be used to perform a self-diagnostic check. Connect Port1
and Port2 connectors that have the same color and at Figure 2.13 press Y*** (Output) to
see if the corresponding X*** (Input) is shown.
Figure 2.13 Inline
18
Table 2.1 I/O(PF2-XY64D2T&PF2-Y16P) Unit
PIN Number
PIN DIFN.
X80(IN) EMS
X87(IN) DRCH RESET DONE(used by TR-7100)
X90(IN) SENSOR1
X91(IN) SENSOR2
X92(IN) SENSOR3
X93(IN) SENSOR4
X94(IN) SENSOR5
X95(IN) SENSOR6
X98(IN) UNLOADER READY (from load - port2 Black-Green)
X9A(IN) TEST OK (from pc)
X9B(IN) PC TEST COMPLETE (from pc)
X9C(IN) PC ABORT (from pc)
X9D(IN) CLEAR NOTIFY PC TEST (from pc)
X9E(IN) 2D LED2(from PC, used by the TR-7006/L)
X9F(IN) LASER ON(from PC, used by the TR-7006/L)
Y100(OUT)
RED LIGHT
Y101(OUT)
YELLOW LIGHT
Y102(OUT)
GREEN LIGHT
Y103(OUT)
BUZZER
Y104(OUT)
REQUEST BOARD FROM LOADER (to unload – Port1
Black-Green)
Y105(OUT)
TEST OK (to unload - port1 Yellow-White)
Y109(OUT)
BARCODE START
Y110(OUT)
START CONVEYOR MOTOR (used by TR-7100)
Y111(OUT) STOP CONVEYOR MOTOR (used by TR-7100)
Y112(OUT)
SLOW CONVEYOR MOTOR (used by TR-7100),
2D LED2 (used by TR-7600/L)
Y113(OUT)
REVERSE CONVEYOR MOTOR (used by TR-7100),
2D LED1 (used by TR-7600/L)
Y114(OUT)
DRCH POWER (used by TR-7100/ TR-7100EP)
Y115(OUT)
DOS PC POWER(used by TR-7100/ TR-7100EP)
Y116(OUT)
BRAKE CONVEYOR WIDTH
Y117(OUT)
NOTIFY PC TEST (used by TR-7100EP/TR7600)
Y118(OUT)
NOTIFY PC EMERGENCY STOP
(used by TR-7100EP/TR7600)
Y119(OUT)
NOTIFY PC READ BARCODE
(used by TR-7100EP/TR7600)