CM602all_EJM8AESM_Service Manual - 第587页

Machinery Part Replacement Remarks Cutting Unit Item lock the rod-ends. Wrench 17 mm Put he chute guide bar back on. Allen key 4 mm Feeler gauge Screw M5 2 pcs. Check the chute guide bar and the return limit of the movab…

100%1 / 1093
Machinery Part Replacement
Remarks
Cutting Unit
Item
Full
y
ti
g
hten the rod ends.
Allen key 6 mm
Screw M8 2 pcs.
Remove the chute guide bar.
Allen key 4 mm
Screw M5 2 pcs.
Position the cylinder so that the cutter blades move smoothly.
Allen key 8 mm
Screw M10 4 pcs.
Adjust the stroke of the cylinder when the movable cutter is retracted.
Clearance from the fixed cutter blade to
the movable one when the movable one
is at the origin: 26 mm +/- 0.2 mm
Caliper
Wrench 17 mm
13
16
15
14
Fixed blade
Movable blade
26.0mm+/-0.2mm
EJM8A-E-SMA050902-A01-00
Page　5-9-2-5
Machinery Part Replacement
Remarks
Cutting Unit
Item
lock the rod-ends. Wrench 17 mm
Put he chute guide bar back on.
Allen key 4 mm
Feeler gauge
Screw M5 2 pcs.
Check the chute guide bar and the return
limit of the movable cutter blade. Put back the chute guide bar, using a
0.1-mm feeler gauge.
Feeler gauge
Caliper
Ruler 150 mm
Connect the cylinder air tubes.
20
With the cutter blades at the extension limit,
17
18
19
Clearance from the guide bar to the movable
cutter blade: 0.05 to 0.2 mm
(0.05-mm feeler gauge should pass through;
0.2-mm one should NOT be inserted.)
45
36.811.2
3±0.5
0.05 - 0.1 mm
0.1-mm feeler gauge
EJM8A-E-SMA050902-A01-00
Page　5-9-2-6
Machinery Part Replacement
Remarks
Cutting Unit
Item
Put the cylinder top cover back on.
Allen key 3 mm
Screw M4x8mm 5 pcs.
Put back the bottom cutter cover.
Allen key 3 mm
Screw M4x10mm 5 pcs.
Put the chute and the feeder cover back
Phillips screwdriver #2
Allen key 3 mm
Screw M4 2 pcs.
Screw M4x10mm 3 pcs.
Thick washer 3 pcs.
Open the cock of the MR unit.
From 0.49MPa
to 0.54MPa
24
21
22
23
1
2
EJM8A-E-SMA050902-A01-00
Page　5-9-2-7