CM602all_EJM8AESM_Service Manual - 第1009页

Direct Tray ・ This section describes the procedures for adjusting the lift-axis stroke. Total Part Weight Key switch FM-1934: Lift-axis height check jig Tools Jigs Tray Assembly/Adjustment 7-2-4 Lift-axis Stroke Adjustme…

100%1 / 1093
Jig: FM-1924
Level: (0.02mm/div.)
Magazine
NG palette position, the lowest-level
Palette jig FM-1931
lowest-level of the lower magazine.
Lock the door guide, pressing it in the
direction of the palette jig and.
Check there is no gap between the guide
and the palette.
A feeler gauge (T=0.05) should not be
inserted.
Feeler gauge
(T=0.05 mm)
5
Put the magazine on the magazine
holder. Put the palette jig onto the
position of the upper magazine and the
Item
Direct Tray
Remark
4
Supplement: Front door guide
X and Y directions: Within 0.1 mm/m
Level the extension section with the jig
and the level.
Tray
Jig
Level
Palette jig
Door guide
NG palette
position
Lowest-magazine position
of the lower magazine
Magazine shutte
r
EJM8A-E-SMA070203-A01-00
Page 7-2-3-3
Direct Tray
・This section describes the procedures for adjusting the lift-axis stroke.
Total Part Weight
Key switch
FM-1934: Lift-axis height
check jig
Tools
Jigs
Tray
Assembly/Adjustment
7-2-4 Lift-axis Stroke Adjustment
Phillips screwdriver #2
Allen keys 3 - 5 mm
Wrench 14 and 19 mm
Magnetic stand
Dial gauge
Torque wrench
Block gauge 10 mm
35
Min.
Removal/Disassembly
20
Min. Min.
kgs.
Teaching
15
Min.
I Since this adjustment requires releasing the safety cover switch, only those who are authorized
to release it based on the Document "Key Switch/Key Disk Receipt Confirmation and Safety
Precautions" are permitted to perform this adjustment.
Dange
r
Caution
Warning
EJM8A-E-SMA070204-A01-00
Page 7-2-4-1
Tray
Put the palette jig on the lift table (extension section) and the supply table.
Remark
Return the lift-axis to the origin.
Item
4
Phillips screwdriver #2
M4 screw 4 to 6 pcs.
Direct Tray
Remove the bolts.Remove the cover.
2
1
3
Raise the lift-axis 422 mm.
Jig: FM-1934
Lift-axis height check jig
Turn off the power.
Rear side
422
Lift table
Supply-
section table
Lift-axis ball screw
FM-1934
FM-1934
EJM8A-E-SMA070204-A01-00
Page 7-2-4-2