CM602all_EJM8AESM_Service Manual - 第151页

Maintenance Adjustment Main Body Beam This section describes the procedures for adjusting the board sensor. ・ Tools Phillips screwdriver #2 Allen key 2.5 mm Ruler 150 mm Caliper ・ Jig None Time for replacement: 10 min. P…

100%1 / 1093
Maintenance Adjustment Main Body Beam
Remarks
Item
Put the feeder cover and the chute back
o
Tighten the two screws at both edges of
the cover. Close the cover. Phillips screwdriver #2
Allen key 3 mm
Screw M4 2 pcs.
Screw M4x10mm 3 pcs.
Thick washer 3 pcs.
9
EJM8A-E-SMA040104-A01-00
Page　4-1-4-4
Maintenance Adjustment Main Body Beam
This section describes the procedures for adjusting the board sensor.
・Tools
Phillips screwdriver #2
Allen key 2.5 mm
Ruler 150 mm
Caliper
・Jig
None
Time for replacement:
10 min.
Part Weight: - kgs.
4-1-5 Board Sensor Positioning
Assembly
Adjustment
5min.
Teaching
min.
Total　Time Weight　of
Part
Removal
Disassembly
5min.
10min.
kgs
Caution
Dange
r
Warning
EJM8A-E-SMA040105-A01-00
Page4-1-5-1
Maintenance Adjustment Main Body Beam
Remarks
Remove the feeder cover.
Phillips screwdriver #2
Screw M4 2 pcs.
Loosen the sensor holding screws.
3-000056
Allen key 2.5 mm
Screw M3
2 pcs. for each sensor
Front reference, Left-to-Right flow Inner-side reference, Right-to-Left flow
Specifications:
A=　49mm±0.5mm
B=100mm±0.5mm
C=　49mm±0.5mm
D=100mm±0.5mm
E=　38mm±0.5mm
F=　10.4mm±0.5mm
G=　49mm±0.5mm
H=100mm±0.5mm
Front reference, Right-to-Left flow, Inner-side reference, Left-to-Right flow
Item
3
4
1
2
F
H
G
B
A
D
C
E
Fixed conveyor rail
Z clamper
End of Stopper
Z clamper
F
H
G
B
A
D
C
E
End of Stopper
End of Stopper
End of Stopper
End of Sto
pp
er
End of Stopper
Fixed conveyor rail
EJM8A-E-SMA040105-A01-00
Page4-1-5-2