CM602all_EJM8AESM_Service Manual - 第153页
Maintenance Adjustment Main Body Beam Remarks Item Once the adjustment is finished, lock the sensor. 3-000056 Allen key 2.5 mm Screw M3 2 pcs. for each sensor Put the feeder cover back on. Phillips screwdriver #2 Screw M…
Maintenance Adjustment Main Body Beam
Remarks
Remove the feeder cover.
Phillips screwdriver #2
Screw M4 2 pcs.
Loosen the sensor holding screws.
3-000056
Allen key 2.5 mm
Screw M3
2 pcs. for each sensor
Front reference, Left-to-Right flow Inner-side reference, Right-to-Left flow
Specifications:
A= 49mm±0.5mm
B=100mm±0.5mm
C= 49mm±0.5mm
D=100mm±0.5mm
E= 38mm±0.5mm
F= 10.4mm±0.5mm
G= 49mm±0.5mm
H=100mm±0.5mm
Front reference, Right-to-Left flow, Inner-side reference, Left-to-Right flow
Item
3
4
1
2
F
H
G
B
A
D
C
E
Fixed conveyor rail
Z clamper
End of Stopper
Z clamper
F
H
G
B
A
D
C
E
End of Stopper
End of Stopper
End of Stopper
End of Sto
pp
er
End of Stopper
Fixed conveyor rail
EJM8A-E-SMA040105-A01-00
Page4-1-5-2
Maintenance Adjustment Main Body Beam
Remarks
Item
Once the adjustment is finished, lock the sensor.
3-000056
Allen key 2.5 mm
Screw M3
2 pcs. for each sensor
Put the feeder cover back on.
Phillips screwdriver #2
Screw M4 2 pcs.
6
5
EJM8A-E-SMA040105-A01-00
Page4-1-5-3
Maintenance Adjustment Main Body Beam
・Tools
Phillips screwdriver #2
Allen key 2.5 mm
Allen key 3 mm
Wrench 13 mm
Iron plate
Dial gauge
Magnetic stand
・Jig
None
Be sure to turn off the SERVO switch when working on the machine.
4-1-6 Leveling the Support Plate
This section describes the procedures for leveling the support plate.
Assembly
Adjustment
20min.
Teaching
50min.
Total Time Weight of
Part
Removal
Disassembly
20min.
90min.
kgs
Caution
Dange
r
Warning
EJM8A-E-SMA040106-A01-00
Page 4-1-6-1