CM602all_EJM8AESM_Service Manual - 第231页
治具基板挿入？ PT ﾃﾞｰﾀ無し 19 Press [Mount pos teach]. 17 Press the "Return" switch. 20 18 Maintenance Adjustment Select the desired stage. ITEM Light Transfer-Head Assembly (8 nozzles) Press [ESC]. Press [Production]. …
Maintenance Adjustment Light Transfer-Head Assembly (8 nozzles)
16
15
Press [OK].
ITEM
14
Pickup and recognition are
suspended and test run
starts.
Warm up the machine for
approximately 10 minutes
and press [Cycle stop] to
stop the machine.
Press the "Unlock" and the "Start"
Test Run screen
keys simultaneously.
Press [Warmup operation]. Press [ESC].
Press [Yes].
REMARKS
13
To warm up the machine,
Select the desired stage.
press [Production].
EJM8A-E-SMA040207-A01-00
Page 4-2-7-6
治具基板挿入？ PTﾃﾞｰﾀ無し
19
Press [Mount pos teach].
17
Press the "Return" switch.
20
18
Maintenance Adjustment
Select the desired stage.
ITEM
Light Transfer-Head Assembly (8 nozzles)
Press [ESC].
Press [Production].
Press [Yes]. Press [OK].
REMARKS
Press [Yes].
EJM8A-E-SMA040207-A01-00
Page 4-2-7-7
ﾍｯﾄﾞﾊﾟｽ
E327012C
24
Remove the components from the board.
Remove the board.Press [Yes].
the "Return" key.
After the machine is stopped, press Place the board jig.
After waiting for the previous process, select "Immediate stop" and display the
After teaching is finished:
If cycle stop is carried out;
teaching is complete.
In case of immediate stop, a
head camera recognition error
has occurred and the machine
stopped; it is necessary to
teach again.
In case of half-way stop, press
"Unlock" and "Start" and finish
all teaching. Perform teaching
agian.
23
Press the "Unlock" and the "Start" keys.
Maintenance Adjustment
ITEM
Light Transfer-Head Assembly (8 nozzles)
21
22
recognition screen.
REMARKS
Press [Yes].
EJM8A-E-SMA040207-A01-00
Page 4-2-7-8