CM602all_EJM8AESM_Service Manual - 第276页

Maintenance Adjustment Light Transfer-Head Assembly (3 nozzles) Remarks Item Change stages. Select Stage B. Carry out Steps 2 to 6 in the same way as Stage A. Check the data after teaching. The offsets are entered automa…

100%1 / 1093
Maintenance Adjustment Light Transfer-Head Assembly (3 nozzles)
Remarks
Item
Press [Xyplane cal teach].
The jig is clamped in the Z direction.
The AF head recognizes the dots on the
jig. Then the AR head recognizes them.
Press [Jig remove].
Both AF and AR heads move away.
Once they finish moving away, remove
the jig.
Press the "Return" key.
Press [Run].
7
8
5
6
EJM8A-E-SMA040306-A01-00
Page　4-3-6-3
Maintenance Adjustment Light Transfer-Head Assembly (3 nozzles)
Remarks
Item
Change stages.
Select Stage B.
Carry out Steps 2 to 6 in the same way
as Stage A.
Check the data after teaching.
The offsets are entered automatically into the screen below:
Offset range:
X: -0.5 mm to +0.5 mm
Y: -0.5 mm to +0.5 mm
11
9
10
EJM8A-E-SMA040306-A01-00
Page　4-3-6-4
Maintenance Adjustment
4-3-7 Mounting Position
Light Transfer-Head Assembly(3 nozzles)
This section describes the procedures for mounting position teaching.
Mounting position
correcting data
Light box 1 set
Board (240 x 216 Th:1.7)
1 pc.
QFP-jig supply-jig stand:
2 pcs.
QFP jig 30 pcs.
Nozzle 1005 6 pcs.
Low-adhesive double-
sided tape
5-hole teaching jig 1 pc.
Assembly/Adjustment
Total timeTeaching
Min.
Phillips screwdriver #2
Min.
kgs
.
90 Min.90 Min.
Part weight
・Tools
・Jig
Removal/Disassembly
Dange
r
Warning
Caution
EJM8A-E-SMA040307-A01-00
Page　4-3-7-1