CM602all_EJM8AESM_Service Manual - 第293页
Maintenance Adjustment Light Transfer-Head Assembly (3 nozzles) Remarks Item Press the "Return" key. To save the machine parameters, press the "Return" key. Press [Unlock] and [Run] simultaneously. Th…
Maintenance Adjustment Light Transfer-Head Assembly (3 nozzles)
Remarks
Item
Press [Teach Posi L table].
Change to [Teach Posi R table]. If the left table is selected,
press [Teach Posi L table]
in order to select the right
table.
Press [Unlock] and [Jig setting] simultaneously.
Place the jig on the
Feeder Table Position 27
of the selected stage.
Press [Unlock] and [Pick pos teach] simultaneously.
The head moves to the jig. → The holes
of the jig are recognized. (X・Y)→ Head 1
descends. (Z)
Press [Unlock] and [Jig remove] simultaneously.
The head moves to the nozzle setting
position (over NG box).
Remove the jig and the
nozzle.
5
6
7
8
EJM8A-E-SMA040308-A01-00
Page4-3-8-3
Maintenance Adjustment Light Transfer-Head Assembly (3 nozzles)
Remarks
Item
Press the "Return" key.
To save the machine
parameters, press the
"Return" key.
Press [Unlock] and [Run] simultaneously.
The axes for the selected stage move to
the origin.
Offsets are entered into the screen below:
Offset range:
X=±1.0㎜
Y=±1.0㎜
Z=±1.0㎜
9
10
11
EJM8A-E-SMA040308-A01-00
Page4-3-8-4
Maintenance Adjustment Light Transfer-Head Assembly (3 nozzles)
This section describes the procedures for determining the nozzle exchange position.
・Tools
None
・Jig
FM-0727
Position Teaching Jig
Nozzle 1003
4-3-9 Nozzle Exchange Position
Remove the support pins beforehand.
Assembly
A
d
j
ustment
min.
Teaching
5min.
Total Time Weight of
Part
Removal
Disassembl
y
min.
5min. kgs
Caution
Dange
r
Warning
EJM8A-E-SMA040309-A01-00
Page 4-3-9-1