CM602all_EJM8AESM_Service Manual - 第297页
Maintenance Adjustment Light Transfer-Head Assembly (3 nozzles) Remarks Item Press [Unlock] and [Run] simultaneously. All axes of the selected stage return to the origin. The offsets are entered into the screen below: Of…
Maintenance Adjustment Light Transfer-Head Assembly (3 nozzles)
Remarks
Item
Press [Unlock] and [Exchange pos tch] simultaneously.
The jigs in the nozzle changer are
recognized by the head camera
automatically.
Press [Unlock] and [Height teach] simultaneously.
Head 3 descends to the nozzle changer
and the height is measured
automatically.
Press [Unlock] and [Jig remove] simultaneously.
The head assembly moves to the jig
setting position (over the NG box).
Press the "Return" key.
5
6
7
8
EJM8A-E-SMA040309-A01-00
Page 4-3-9-3
Maintenance Adjustment Light Transfer-Head Assembly (3 nozzles)
Remarks
Item
Press [Unlock] and [Run] simultaneously.
All axes of the selected stage return to
the origin.
The offsets are entered into the screen below:
Offset range:
X：-2.0mm to 2.0mm
Y：-2.0mm to 2.0mm
Z：-2.0mm to 2.0mm
9
10
EJM8A-E-SMA040309-A01-00
Page 4-3-9-4
Maintenance Adjustment Light Transfer-Head Assembly (3 nozzles)
This section describes the procedures for determining offsets for the load applied to the load head.
・Tools
None
・Jig
Nozzle 1003
Load Measuring Jig
作業時間 15分
部品重量 - kg
4-3-10 Load Head
Caution
Danger
Warning
Assembly/Adjustment
20 min.
Teaching
15 min.
Removal/Disassembly
min.
Total Time
35 min.
Part Weight
kgs.
EJM8A-E-SMA040310-A01-00
Page4-3-10-1