CM602all_EJM8AESM_Service Manual - 第302页

Maintenance Adjustment Light Transfer-Head Assembly (3 nozzles) Remarks Item Setting Input value 1 Decimal Point Position 9 10 Check that "DSP1" is displayed after Input value 1 is set. Check that "DEC-P&q…

100%1 / 1093
Maintenance Adjustment Light Transfer-Head Assembly (3 nozzles)
Remarks
Item
Setting Display value 2.
Setting Input value 1.
7
8
Check that "DSP2" is displayed after
Input value 2 is set.
To set "09800," press
To determine, press
Check that "INP1" is displayed
after Display value 2 is set.
Re-press
RESET/
TEACH
To determine, press
Press to highlight the digit
to be changed.
RESET/
TEACH
Place a 100-g weight on the load cell.
Press for 1 sec.
EJM8A-E-SMA040310-A01-00
Page4-3-10-4
Maintenance Adjustment Light Transfer-Head Assembly (3 nozzles)
Remarks
Item
Setting Input value 1
Decimal Point Position
9
10
Check that "DSP1" is displayed
after Input value 1 is set.
Check that "DEC-P" is displayed
after Display value 1 is set.
Check the position of the decimal
point. To determine, press
ESC
Press several times until
the number is displayed.
Finish the setup.
Proceed to load coefficient teaching.
Pres s to highlight the digit
be changed.
To set "00980," press
To determine, press
Press to highlight the digit
to be changed.
EJM8A-E-SMA040310-A01-00
Page4-3-10-5
Maintenance Adjustment Light Transfer-Head Assembly (3 nozzles)
Remarks
Item
Press [Load Head].
Select the desired stage.
Press [Unlock] and [Jig setting] simultaneously.
Set the jig on the selected
stage.
Check that the number of
the head to be taught is
displayed in the [Head No.]
box.
If the number is wrong,
press the [Head No] box
until the desired number is
displayed.
Press [Unlock] and [Nozzle set] simultaneously.
Set Nozzle 1003 on the
head to be taught.
13
14
11
12
EJM8A-E-SMA040310-A01-00
Page4-3-10-6