CM602all_EJM8AESM_Service Manual - 第318页

5-1-1 X-axis Secondary-Part Replacement • This section describes the procedures for replacing the X-axis secondary-part. Cover jigs (large and small) Phillips screwdriver #2 Allen key 3 mm Allen key 4 mm Cloth Tools Jig …

100%1 / 1093
5-1-1 X-axis Secondary-Part Replacement
• This section describes the procedures for replacing the X-axis secondary-part.
Cover jigs (large and
small)
Phillips screwdriver #2
Allen key 3 mm
Allen key 4 mm
Cloth
Tools
Jig
45 Min. Min.
Main Body
Total Time Part Weight
kg
235
Min.
Machinery Part Replacement
Machinery Part Replacement
Removal/Disassembly
120
Teaching
Min.70
Assembly/Adjustment
Non-magnetic Allen key (Straight)
(Should be short-processed.)
Picture: Manufacturer: TRUSCO
NAKAYAMA
Flame-proof tool series
Model: BHX-4, BHX-5 (Size M4 and M5)
Main Body
5-1
Caution
Danger
Warning
5
EJM8A-E-SMA050101-A01-00
Page　5-1-1-1
Four bolts come with the cover jig.
3
4
Remove the head, referring to the
Allen key 3 mm
Screw M4 (Special) x 2
Main Body
Remarks
Machine Part Replacement
Item
Non-magnetic Allen key
(M4)
Short-processed
For tightening lightly
Not for securely.
To replace the rear-side part, move the
front and rear beams towards you. One
set of two secondary parts (right and left)
Remove the feeder cover.
Head Replacement Procedures.
Tighten the four bolts.
1
Put the cover (large) over the left secondary-
part, aligning the "N" marks.
Turn off the power and the air.
2
1
2
Secondary parts
Beam
Head
installing
plate
Cover
N
N
Bolts that come
with the cover.
Cover (large)
Secondary
part
Front
Rear
EJM8A-E-SMA050101-A01-00
Page　5-1-1-2