CM602all_EJM8AESM_Service Manual - 第331页
Machinery Part Replacement Main Body Remarks Item Replace the sensor. 8-000024 Allen key 2.5 mm Screw M3 2 pcs. Put back the J1 ■ 27 connectors. 11-000001 The missing part ■ of the connector name is one of the followings…
Machinery Part Replacement Main Body
Remarks
Switch off the main power.
Remove the feeder cover.
Phillips screwdriver #2
Screw M4 2 pcs.
Remove the cover from the left side.
Phillips screwdriver #2
Screw M4 4 pcs.
Remove J1
■27 connectors.
11-000001
The missing part ■ of the connector
name is one of the followings:
AF-1
AR-3
BF-A
BR-C
Item
2
3
4
1
EJM8A-E-SMA050103-A01-00
Page 5-1-3-2
Machinery Part Replacement Main Body
Remarks
Item
Replace the sensor.
8-000024
Allen key 2.5 mm
Screw M3 2 pcs.
Put back the J1
■27 connectors.
11-000001
The missing part ■ of the connector
name is one of the followings:
AF-1
AR-3
BF-A
BR-C
Put the left-side cover back on.
Phillips screwdriver #2
Screw M4 4 pcs.
Put the feeder cover back on.
ｶﾊﾞｰ達
Phillips screwdriver #2
Screw M4 2 pcs.
5
6
7
8
EJM8A-E-SMA050103-A01-00
Page 5-1-3-3
Machinery Part Replacement Main Body
Remarks
Item
Switch on the main power.
Put the 2-mm block gauge on the jig.
Put the 2-mm block gauge on the jig as
shown below:
Precisely position the Y-axis origin sensor.
8-000045、000046
Set the jig as shown in the
picture at left.
Move the head assembly
to the stopper next to the
jig, and keep it there.
Lock the sensor when the
dog blocks the sensor
light.
11
10
9
55 mm
2 mm
EJM8A-E-SMA050103-A01-00
Page 5-1-3-4