CM602all_EJM8AESM_Service Manual - 第366页

Main Body Iron plate holding the magnetic stand Allen key 3 mm Screw M4 1 pc. Place the holding iron plate on the lower linear slider so that the magnetic stand can placed on the plate. 16 15 Tighten the upper linear rai…

100%1 / 1093
Be careful of the orientation of the
nipples and the length of the joints.
10
11
12
Block gauge 35 mm
Allen key 3 mm
Screw M4 x 18 13 pcs.
Check the reference side of the
linear rail.
9
Fit the grease nipples onto the sliders.
Position the linear rail so that it is positioned 35-mm lower than the ball screw.
Wrench 7 mm
項目(ITEM) 備考(REMARK)
Machine Part Replacement Main Body
Mount the straight edge on the Y-axis
linear rail.
Straight edge 1500 mm
E872
BZ552A
Ref. side
JAPAN　　　　LWE15
Ref. side
35 mm
35-mm block gauges
Ref. side
EJM8A-E-SMA050109-A01-00
Page　5-1-9-4
Main Body
Iron plate holding the
magnetic stand
Allen key 3 mm
Screw M4 1 pc.
Place the holding iron plate on the lower linear slider so that the magnetic stand can
placed on the plate.
16
15
Tighten the upper linear rail holding bolts.
Block gauge 85 mm
Allen key 3 mm
Screw M4 x 18 13 pcs.
Tighten the linear rail holding bolts.
placed on the plate.
Iron plate holding the
magnetic stand
Allen key 3 mm
Screw M4 1 pc.
Place the holding iron plate on the lower linear slider so that the magnetic stand can
Referring to the lower linear rail, position the upper linear rail.
Specifications:
Straightness:
0.015 mm or less
Tightening torque:
3.53 N.m
Magnetic stand
Dial gauge
Allen key 3 mm
Screw M4 x 18 13 pcs.
Check the straightness of the linear rail.
Machine Part Replacement
項目(ITEM) 備考(REMARK)
13
35 mm
85 mm
85-mm block gauge
Ref. side
EJM8A-E-SMA050109-A01-00
Page　5-1-9-5
Machine Part Replacement Main Body
Allen key 3 mm
Allen key 4 mm
Screw M4 x 12 16 pcs.
Small flat round M4
16 pcs.
Screw M5 2 pcs.
Specifications:
Straightness:
0.015 mm or less
Tightening torque:
3.53 N.m
Magnetic stand
Dial gauge
Allen key 3 mm
Screw M4 x 18 13 pcs.
20
Place the iron plate on the plate so that
Iron plate holding the
magnetic stand
Allen key 3 mm
Screw M4 1 pc.
the magnetic iron can be placed on the plate.
19
Connect the grease hoses.
Allen key 3 mm
Screw M4 4 pcs.
18
Fit the plate, pressing the dowel pins on the back of the plate against the slider.
項目(ITEM) 備考(REMARK)
17
Tighten the linear rail holding bolts.
Check the straightness of the linear rail.
Dowel pins
Back of Head Plate
EJM8A-E-SMA050109-A01-00
Page　5-1-9-6