CM602all_EJM8AESM_Service Manual - 第409页

Machinery Part Replacement Remarks Item Transfer Head Assembly (8-nozzle type) Put the front head cover back on. Phillip screwdriver #1 Round cross-head screw M3 x 4 Switch on the power and air supply. from 0.49MPa to 0.…

100%1 / 1093
Machinery Part Replacement
Remarks
Item
Transfer Head Assembly (8-nozzle type)
Connect the air tube.
Connect the connectors.
Secure the earth cable with a cable tie.
Phillips screwdriver #2
Round cross-head screw
M4 1 pc.
Put the upper head cover back on.
Phillip screwdriver #2
Round cross-head screw
M4 x 4
19
18
17
20
Put down the pin.
Insert.
CN13
MC15CX
Head sink
CN3
SW1
CN1
CN12
CN16
CN11
SW2
CN2
SW3
CN10
CN4
CN5
CN7
CN6
CN9
CN8
CN15
CN14
Push and turn.
EJM8A-E-SMA050301-A01-00
Page5-3-1-6
Machinery Part Replacement
Remarks
Item
Transfer Head Assembly (8-nozzle type)
Put the front head cover back on.
Phillip screwdriver #1
Round cross-head screw
M3 x 4
Switch on the power and air supply.
from 0.49MPa
to 0.54MPa
Adjustment
Teaching
Head Camera Adjustment
---Focus and Theta---
Board Recognition Camera
--- X and Y-axis Origin Offset
Z-axis Origin Offset
Chip Recognition Camera
and Theta-axis Origin Offset
Determining the Mounting Height and
Positioning the Board
Pickup Position
Nozzle Exchange Position
Mounting Position
Section 4-1-2
Section 4-2-2
Section 4-2-3
Section 4-2-4
Section 4-2-5
Section 4-2-8
Section 4-2-9
Section 4-2-7
22
23
21
1
2
EJM8A-E-SMA050301-A01-00
Page5-3-1-7
Machinery Part Replacement
This section describes the procedures for replacing the spline shafts.
・Tools
Phillips screwdriver #1
Phillips screwdriver #2
Torque screwdriver
Allen key 2.5 mm
Allen key 4 mm
Nipper
Magic marker
BARRIERTA IEL/V
(Grease)
Tweezers
MP Grease 2S
Feeler gauge 0.1 mm
・Jig
Tension gauge
Plate
5-3-2 Spline Shaft Replacement
Light Transfer-Head Assembly (8-nozzle type)
　
　　　 If there is no problem with the bearing case, replace the spline shaft only.
Caution
Danger
Warning
55min. min.
Assembly
Adjustment
Teaching
Total　Time Weight　of
Part
Removal
Disassembly
55min.
110min.
kgs
EJM8A-E-SMA050302-A01-00
Page　5-3-2-1