CM602all_EJM8AESM_Service Manual - 第442页
Machinery Part Replacement Remarks Light Transfer-Head Assembly (8-nozzle type) Item Lock the new fan. Be careful with the orientation of the fan. Allen key 2.5 mm Screw M3 4 pcs. Connect Connector CN5. Put back the head…
Machinery Part Replacement
Remarks
Switch off the main power.
Remove the cover from the head.
Phillips screwdriver #1
Phillips screwdriver #2
Remove Fan Connector CN5.
Remove the fan holding screws.
Allen key 2.5 mm
Screw M3 4 pcs.
3
4
1
2
Light Transfer-Head Assembly (8-nozzle type)
Item
CN1
CN2
CN3 CN4
CN5
CN12
CN10CN9
CN7
CN6
MC14CX
EJM8A-E-SMA050309-A01-00
Page 5-3-9-2
Machinery Part Replacement
Remarks
Light Transfer-Head Assembly (8-nozzle type)
Item
Lock the new fan.
Be careful with the orientation of the fan. Allen key 2.5 mm
Screw M3 4 pcs.
Connect Connector CN5.
Put back the head cover.
Phillips screwdriver #1
Phillips screwdriver #2
Switch on the main power.
7
8
5
6
CN1
CN2
CN3 CN4
CN5
CN12
CN10CN9
CN7
CN6
MC14CX
EJM8A-E-SMA050309-A01-00
Page 5-3-9-3
Machinery Part Replacement
This section describes the procedures for replacing the vacuum sensor.
・Tools
Precision screwdriver
Phillips screwdriver #1
Allen key 2.5 mm
Nipper
Cable ties
・Jig
None
5-3-10 Vacuum Sensor Replacement
L
ight Transfer-Head Assembly (8-nozzle type
)
Caution
Dange
r
Warning
Assembly
Adjustment
40min.
Teaching
min.
Total Time Weight of
Part
Removal
Disassembly
40min.
80min.
kgs
EJM8A-E-SMA050310-A01-00
Page 5-3-10-1