CM602all_EJM8AESM_Service Manual - 第446页

Machinery Part Replacement Remarks L ight Transfer-Head Assembly (8-nozzle type ) Item Fit the new sensor onto the block. Both front and rear sides Phillips screwdriver #1 Screw M3 4 pcs. Place the vacuum sensor along wi…

100%1 / 1093
Machinery Part Replacement
Remarks
L
ight Transfer-Head Assembly (8-nozzle type
)
Item
Remove the vacuum tubes and the valve connectors.
Both front and rear sides
Remove the valves.
Both front and rear sides Precision screwdriver
Valve holding screws
8 pcs.
Remove the vacuum sensor together with
the block. Both front and rear sides Allen key 2.5 mm
Screw M3 4 pcs.
Remove the sensor.
Both front and rear sides Phillips screwdriver #1
Screw M3 4 pcs.
5
8
6
7
EJM8A-E-SMA050310-A01-00
Page　5-3-10-3
Machinery Part Replacement
Remarks
L
ight Transfer-Head Assembly (8-nozzle type
)
Item
Fit the new sensor onto the block.
Both front and rear sides Phillips screwdriver #1
Screw M3 4 pcs.
Place the vacuum sensor along with the blacket.
Both front and rear sides
Allen key 2.5 mm
Screw M3 4 pcs.
Connect the valves.
Both front and rear sides Precision screwdriver
Valve holding screws
8 pcs.
Connect the vacuum tubes and the valve connectors.
Both front and rear sides
9
10
11
12
EJM8A-E-SMA050310-A01-00
Page　5-3-10-4
Machinery Part Replacement
Remarks
L
ight Transfer-Head Assembly (8-nozzle type
)
Item
Connect the vacuum sensor connector.
Secure the cables with cable ties. Rear side
Nipper
Cable ties
Put the head assembly back on.
Refer to "Transfer Head Replacement." Section 5-3-1
Switch on the main power and air supply.
15
14
13
16
CN1
CN2
CN3 CN4
CN5
CN12
CN10CN9
CN7
CN6
MC14CX
1
2
The same boards are installed at
the front and the rear side of the
head assembly.
EJM8A-E-SMA050310-A01-00
Page　5-3-10-5