CM602all_EJM8AESM_Service Manual - 第45页
CM602- L Se r vi c e Manual 43 Handli ng o f th e comp onent th i cknes s sensor (op tion) Si nce the component thic kness sensor (opt ion) compli es w it h t he Class 1 limit s o f IEC60825-1 (Laser Saf ety Standar ds),…
CM602-L
Service Manual
42
Handling of the component thickness sensor (option)
Since the component thickness sensor (option) complies with the Class 1 limits of IEC60825-1 (Laser
Safety Standards), it is basically safe under a normal usage pattern. In maintenance or operation,
however, avoid looking directly at it.
1.
Component thickness sensor (on-the-head type) (optional for the high-speed head (12 nozzles))
The component thickness sensor (on-the-head type) can be installed in the front and the rear of the machine.
The maximum output of the laser components is 0.35 mW. The sensor head has such a structure as
will not expose workers directly to the laser radiation if they open its cover. For safety’s sake, however,
never open the cover of the sensor head.
Item Laser specifications
Manufacturer Panasonic Factory Solutions Co., Ltd.
Model No. N610024026AB
Wavelength 655 nm
Output 0.350 mW
Class Class 1
Emission
duration
Anytime during power on
Installation
location
See the left figure.
Limits IEC60825-1 2001
Laser class label on the machine
The following label is attached to the machine with the component thickness sensor
(on-the-head type) installed.
EJM8A-E-XXA00-A04-01
EJM4A-AA01
EJM4A-AA01
EJM8A-109E
CM602-L
Service Manual
43
Handling of the component thickness sensor (option)
Since the component thickness sensor (option) complies with the Class 1 limits of IEC60825-1 (Laser
Safety Standards), it is basically safe under a normal usage pattern. In maintenance or operation,
however, avoid looking directly at it.
2.
Component thickness sensor (fixed-on-the-machine type) (optional for the high-speed head (8 nozzles))
The component thickness sensor (fixed-on-the-machine type) can be installed in the front and the rear
of the machine.
The maximum output of the laser components is 0.35 mW. The sensor head has such a structure as
will not expose workers directly to the laser radiation if they open its cover. For safety’s sake, however,
never open the cover of the sensor head.
Item Laser specifications
Manufacturer Panasonic Factory Solutions Co., Ltd.
Model No. N610016841AA
Wavelength 655 nm
Output 0.350 mW
Class Class 1
Emission
duration
Anytime during power on
Installation
location
See the left figure.
Limits IEC60825-1 2001
Laser class label on the machine
The following label is attached to the machine with the component thickness sensor
(fixed-on-the-machine type) installed.
EJM8A-E-XXA00-A04-00
EJM4A-AA01
EJM4A-AA01
EJM8A-110E
CM602-L
Service Manual
44
Handling of the cutting unit on the 6-row feeder mount (option)
When the direct tray feeder is connected, the 6-row feeder mount is always connected to its right. The
6-row feeder mount is equipped with the cutting unit for tape cutting. You cannot touch its cutter blade
because the component reel holder unit in front of the cutting unit is fixed in normal cases. If you unfix it
and put your hands in, you may touch the cutter blade directly. Although the warning/caution labels are
affixed for safety, never put your hands in there.
EJM8A-E-XXA00-A04-00
EJK1A-013E
Direct tray feeder
Cutting unit
6-row feeder mount
Component reel holder unit