CM602all_EJM8AESM_Service Manual - 第460页
Machinery Part Replacement This section describes the procedures for removing the theta unit. ・ Tools Phillips screwdriver #1 Allen key 2.5 mm Allen key 3 mm Allen key 4 mm Nipper ・ Jig None Light Transfer Head Assembly …
Machinery Part Replacement
Remarks
Light Transfer-Head Assembly (8-nozzle type)
Item
Vacuum/Air Tube Layout
7
TOP
MC15CX
FRONT RIGHT SIDE
MC14CX#1
ΘMOTOR
BOTTOM
LEFT SIDEBACK
MC14CX#2
Head Camera
真空用配管
VACUUM TUBE
AIR TUBE
ｴｱｰ配管
EJM8A-E-SMA050312-A01-00
Page 5-3-12-5
Machinery Part Replacement
This section describes the procedures for removing the theta unit.
・Tools
Phillips screwdriver #1
Allen key 2.5 mm
Allen key 3 mm
Allen key 4 mm
Nipper
・Jig
None
Light Transfer Head Assembly (8-nozzle type)
5-3-13 Theta Unit Removable
Caution
Danger
Warning
Assembly
A
d
j
ustment
15min.
Teaching
77min.
Total Time Weight of
Part
Removal
Disassembl
y
15min.
107min.
kgs
EJM8A-E-SMA050313-A01-00
Page 5-3-13-1
Machinery Part Replacement
Remarks
Switch off the main power and air supply.
From 0.49MPa
to 0.55MPa
Remove the head assembly.
1-000279
Refer to "Transfer Head Assembly." Section 5-3-1
Remove the theta motor connectors. Cut the cable ties.
When removing the cables, be careful of
the cabling on the rear side.
Cut the cable ties. Remove the air tube.
Both front and rear sides. Nipper
Transfer Head Assembly (8-nozzle type)
1
3
4
Item
2
1
2
EJM8A-E-SMA050313-A01-00
Page 5-3-13-2