CM602all_EJM8AESM_Service Manual - 第483页

Machinery Part Replacement Remarks Item Light Transfer-Head Assembly (3-nozzle type) Put the cable-holding bracket back on. 13 Specifications: 85 mm to 90 mm Phillips screwdriver #2 Screw M4 2 pcs. Connect the connector …

100%1 / 1093
Machinery Part Replacement
Remarks
Item
Light Transfer-Head Assembly (3-nozzle type)
Replace the unit.
Connect the grease tube.
2-000169
Secure the grease tube with a cable tie.
2-000168
Nipper
Cable tie
Secure the unit with the screws.
2-000167
Allen key 3 mm
Screw M4 3 pcs.
10
11
12
9
EJM8A-E-SMA050402-A01-00
Page 5-4-2-4
Machinery Part Replacement
Remarks
Item
Light Transfer-Head Assembly (3-nozzle type)
Put the cable-holding bracket back on.
13
Specifications: 85 mm to
90 mm
Phillips screwdriver #2
Screw M4 2 pcs.
Connect the connector to the replaced unit.
2-000163
Put the head cover back on.
2-000157、000158
Phillips screwdriver #1
Phillips screwdriver #2
Screw M3 2 pcs.
Screw M4 2 pcs.
Put the feeder cover back on. Remove the bubble wrap from the table.
Phillips screwdriver #2
Screw M4 2 pcs.
15
14
16
85 mm to 90 mm
EJM8A-E-SMA050402-A01-00
Page 5-4-2-5
Machinery Part Replacement
Remarks
Item
Light Transfer-Head Assembly (3-nozzle type)
Switch on the power and air suppl
y.
Teaching
Chip Recognition Camera --- Theta Axis
Origin Offset
Determining the Mounting Height and
Positioning the Board
Pickup Position
Nozzle Exchange Position
Load Head
Lead Checker
Section 4-3-4
Section 4-3-5
Section 4-3-8
Section 4-3-9
Section 4-3-10
Section 4-3-11
18
17
1
2
EJM8A-E-SMA050402-A01-00
Page 5-4-2-6