CM602all_EJM8AESM_Service Manual - 第495页
Machinery Part Replacement Z Unit (3-nozzle type) 1 Remove the feeder cover. Switch off the power. Phillips screwdriver #1 Phillips screwdriver #2 Screw M3 2 pcs Screw M4 2 pcs. 4 3 2 Allen key 3 mm Screw M4 3 pcs. Phill…
Machinery Part Replacement
Z Unit (3-nozzle type)
Assembly/Adjustment
This section describes the procedures for replacing the stroke end sensor
Stroke End Sensor Replacement5-5-1
Min.
Phillips screwdriver #1
Phillips screwdriver #2
Allen key 2.5 mm
Allen key 3 mm
Caliper
None
• Tools
• Jigs
Removal/Disassembly
10
Min.
10
Min.
Kg
Teaching Total Time Part Weight
Min.
20
Z Unit (3-nozzle type)
5-5
Caution
Danger
Warning
EJM8A-E-SMA050501-A01-00
Page 5-5-1-1
Machinery Part Replacement
Z Unit (3-nozzle type)
1
Remove the feeder cover.
Switch off the power.
Phillips screwdriver #1
Phillips screwdriver #2
Screw M3 2 pcs
Screw M4 2 pcs.
4
3
2
Allen key 3 mm
Screw M4 3 pcs.
Phillips screwdriver #2
Screw M4 2 pcs.
Remove the head cover.
Tool/Spec/Installation
Item Remarks
Tool/Spec/Installation
Tool/Spec/Installation
Remove the cover holding screws.
Tool/Spec/Installation
EJM8A-E-SMA050501-A01-00
Page 5-5-1-2
6
Tool/Spec/Installation
Allen key 2.5 mm
Screw M3 2 pcs.
Tool/Spec/Installation
7
Remove the sensor holding screws. Replace the sensor.
Tool/Spec/Installation
Disconnect the sensor connector.
5
Z Unit (3-nozzle type)
Remarks
Machinery Part Replacement
Item
Remove the sensor-cable-holding screws. Remove the sensor.
Allen key 3 mm
Screw M4 2 pcs.
Remove the
cable-holding
screw.
Remove the
sensor-holding-
bracket screw.
EJM8A-E-SMA050501-A01-00
Page 5-5-1-3