CM602all_EJM8AESM_Service Manual - 第50页
CM602- L Se r vi c e Manual 50 Dispo sal of air spring Thi s m achine uses the air spring t o open/close cov er s. It is v er y dangerous to dispose of it as it is, because hi gh-pr essure air is sealed i nto it. Bef ore…
CM602-L
Service Manual
49
Serial plate
The serial plate indicating the nickname (Model ID) and production number (Serial No.) of the machine is
pasted on the following location.
CM602-L
Actually,
∗
is replaced with a numeric value.
EJM8A-E-XXA00-A05-01
EJM4A-AB01
CM602-L
NM-EJM8A
CM602-L
Service Manual
50
Disposal of air spring
This machine uses the air spring to open/close covers. It is very dangerous to dispose of it as it is,
because high-pressure air is sealed into it. Before disposal, be sure to purge the air.
Locations where the air spring is used
Removing air spring
Turn the hexagon socket head cap screws counterclockwise and remove the spring.
Disposing of air spring
Drill a hole in the spring and purge the air from it completely.
Range to drill the air spring
15 mm to 20 mm
EJM8A-E-XXA00-A05-01
1B4C-442E
Drilled hole
EJM4A-AA01
1D4C-406E
Air spring
Hexagon socket head
cap screw
CM602-L
Service Manual
51
Disposal of components containing mercury
NOTICE
This machine has a fluorescent lamp (a backlight) that contains a small amount of
mercury. It also contains lead in some components. Disposal of these materials may
be regulated in your community due to environmental considerations.
For disposal or recycling information please contact your local authorities, or the
Electronics Industries Alliance.
This machine has a fluorescent lamp (a backlight) built into the color touch panel.
For information on how to remove the fluorescent lamp (the backlight), refer to the Maintenance
Manual.
Locations where the fluorescent lamp (the backlight) is used
EJM8A-E-XXA00-A05-01
EJM4A-AA01
EJM4A-010E
Color touch panel (Two lamps in use)
Screw
Color touch panel
Fluorescent lamp (Backlight)
Cover