CM602all_EJM8AESM_Service Manual - 第516页
Check machine p arameters. Correct the old offsets. A fter chan g in g the head, enter Z=+2. Offset ran g e: -2.5 to 4.5 If an value exceedin g the ran g e is entered, an axis error will occur . 4-1-2: Head Camera Ad j u…
Machinery Part Replacement
Z Unit (3-nozzle type)
Check the basic parameters.
13
Switch on the power and air supply
.
From 0.49 Pa
To 0.54MPa
Change the system parameters
to "HighSpd head." according to the machine specifications.
Check the option parameters.
15
16
Change the setup of the desired stage
Change the system parameters.
RemarksItem
14
1
2
EJM8A-E-SMA050504-A01-00
Page 5-5-4-5
Check machine
p
arameters.
Correct the old offsets.
A
fter chan
g
in
g
the head, enter Z=+2.
Offset ran
g
e:
-2.5 to 4.5
If an value exceedin
g
the ran
g
e
is entered, an axis error will occur
.
4-1-2: Head Camera Ad
j
ustment
Item Remarks
Machinery Part Replacement
Z Unit (3-nozzle type)
Once system parameters
have been changed, power
down and then power up
the machine.
19
Z=+2
Enter +2, when changing
the head no matter which
way from the high-speed to
the multi-purpose type or
from the multi-purpose to
the high-speed type.
Correct Z-axis offset positions 1 to 3
.
The other adjustments:
4-2-2: Board Recognition Camera --- X and Y-axis Origin Offset
4-2-3: Z-axis Origin Offset
4-2-4: Chip Recognition Camera --- Theta Axis Origin Offset
4-2-5: Determining the Mounting Height and Positioning the Board
4-2-6: XY Plane Calibration
4-2-8: Pickup Position
4-2-9: Nozzle Exchange Position
4-2-12: Light Intensity
4-2-7: Mounting Position
Teaching:
Check the previous and the next
20
18
17
--- Focus and Theta
processes.
EJM8A-E-SMA050504-A01-00
Page 5-5-4-6
Machinery Part Replacement
This section describes the procedures for replacing the Z-motor.
• Tools
Phillips screwdriver #1
Phillips screwdriver #2
Allen key 2 mm
Allen key 3 mm
BARRIERTA
• Jigs
None
Z Unit (3-nozzle type)
5-5-5 Z Motor Replacement
Assembly
Adjustment
20min.
Teaching
5min.
Total Time Weight of
Part
Removal
Disassembly
20min.
45min.
kgs
Caution
Dange
r
Warning
EJM8A-E-SMA050505-A01-00
Page 5-5-5-1