CM602all_EJM8AESM_Service Manual - 第551页
Be careful not to let the camera fall. Phillips screwdriver #1 Phillips screwdriver #2 Screw M3 8 pcs. M4 4 pcs. Tools and Specifications Head Camera Unit Item Remarks Tools and Specifications Switch off the main power. …
Kgs.
min.
67
min.
20 min. 47 min.
A
ssembl
y
A
d
j
ustmen
t
Teaching Total Time
Weigh
t
o
f
Part
Removal
Disassembl
y
Phillips screwdriver #1
Phillips screwdriver #2
Allen key 3 mm
FM-1112
Head Camera Height Jig
Machinery Part Replacement Head Camera Unit
This section describes the procedures for replacing the head camera.
5-6-2 Head Camera Replacement
・Tools
・Jig
Dange
r
Warning
Caution
EJM8A-E-SMA050602-A01-00
Page 5-6-2-1
Be careful not to let the camera fall.
Phillips screwdriver #1
Phillips screwdriver #2
Screw M3 8 pcs.
M4 4 pcs.
Tools and Specifications
Head Camera Unit
Item Remarks
Tools and Specifications
Switch off the main power.
3
Allen key 3 mm
Screw M4 4 pcs.
Phillips screwdriver #1
Connector screw
4
2
1
Machinery Part Replacement
Remove the head cover
.
Tools and Specifications
Disconnect the connector.
Tools and Specifications
Remove the camera holding screws, holding the camera.
EJM8A-E-SMA050602-A01-00
Page 5-6-2-2
Top view
Take care with the orientation of the
Connect the connector.
Tools and Specifications
8
7
6
5
Fit the LED lamp into the new camera.
Tools and Specifications
Allen key 3 mm
Screw M4 4 pcs.
Tools and Specifications
connector.
Install the camera. Lightly tighten the screws so that the camera will not fall.
Tools and Specifications
Allen key 3 mm
Screw M4 4 pcs.
Remove the LED lamp from the camera.
Machinery Part Replacement Head Camera Unit
Item Remarks
Camera connector
LED cable
Take care with the orientation of the
camera. (Check the connector position.)
EJM8A-E-SMA050602-A01-00
Page 5-6-2-3