CM602all_EJM8AESM_Service Manual - 第563页
Machinery Part Replacement Remarks Line Camera Unit Item Phillips screwdriver #2 Allen key 3 mm Screw M4 2 pcs. Screw M4x10 mm 3 pcs. Thick washer 3 pcs. Switch on the main power. Turn the switch to the right. For the ch…
Machinery Part Replacement
Remarks
Line Camera Unit
Item
Connect the LED light connector.
Nipper
JAE connector
Connect the camera connector and the
camera power supply connector, which
are placed under the board table.
Put back the lower cover.
Phillips screwdriver #2
Round cross-head screw
M5 4 pcs.
Put the lower chute back on.
Allen key 4 mm
Screw M5x12mm 4 pcs.
Thick washer 4 pcs.
14
13
15
16
Chute installing
section (left)
Chute installing
section (right)
EJM8A-E-SMA050701-A01-00
Page 5-7-1-5
Machinery Part Replacement
Remarks
Line Camera Unit
Item
Phillips screwdriver #2
Allen key 3 mm
Screw M4 2 pcs.
Screw M4x10 mm 3 pcs.
Thick washer 3 pcs.
Switch on the main power.
Turn the switch to the right.
For the chip recognition camera and
theta-axis offset teaching, see their
instructions.
A
d
j
ustment
Chip Recognition Camera Theta
Positioning
Teaching
Chip Recognition Camera and Theta-
axis Origin Offset
Mounting Position
Section 4-1-1
Section 4-2-4
Section 4-2-7
Put the feeder cover and the chute back on.
18
19
17
EJM8A-E-SMA050701-A01-00
Page 5-7-1-6
Machinery Part Replacement
• Tools
None
• Jigs
Feeder Cart Installing Section
5-8-1 Feeder Cart Installation and Removal
3分
k
Feeder Cart Installing Section
5-8
Assembly
Adjustment
2min.
Teaching
min.
Total Time Weight of
Part
Removal
Disassembly
1min.
min.
kgs
Caution
Dange
r
Warning
EJM8A-E-SMA050801-A01-00
Page5-8-1-1