CM602all_EJM8AESM_Service Manual - 第683页
Machinery Part Replacement This section describes the procedures for determining the mounting height and for positioning the board. Tools None Jig FM-1074 Board jig 50 mm x 50 mm (with a hole) Nozzle 130S 5-11-6 Determin…
Maintenance Part Replacement 12-Nozzle Head Teaching
Remarks
Item
Once the width has been adjusted, press [Offset set].
The preset offset is changed to the new
one.
Press the [Return] key.
Max: 460 mm+/-0.2mm
Min: 50 mm+/-0.2mm
The offset is entered into the screen below:
Offset range:
0.00mm to +5.00mm
7
6
5
EJM8A-E-SMA051105-A01-00
Page 5-11-5-3
Machinery Part Replacement
This section describes the procedures for determining the mounting height and for positioning the board.
Tools
None
Jig
FM-1074
Board jig 50 mm x 50 mm
(with a hole)
Nozzle 130S
5-11-6 Determining the Mounting Height and Positioning the Board
12-Nozzle Head Teaching
Remove the support pins beforehand.
10+/-0.05mm
10+/-0.05mm
50mm
50mm
t= 3.0mm
Caution
Dange
r
Warning
EJM8A-E-SMA051106-A01-00
Page 5-11-6-1
Machinery Part Replacement
Remarks
Press [PCB positioning Mount height].
Be sure to remove the
support pins beforehand
since the width of the
conveyor is adjusted in
this step.
Select the stage to teach. (Front)
Press [Jig setting].
• Fit the 130S nozzle on the number 5
nozzle holder.
12-Nozzle Head Teaching
Item
1
2
3
EJM8A-E-SMA051106-A01-00
Page 5-11-6-2