CM602all_EJM8AESM_Service Manual - 第707页
Machinery Part Replacement This sections lists the differences between 12-nozzle-head and 8-nozzle-head teaching jigs. Tools None Jig 12-Nozzle Head Teaching 5-11-12 12-Nozzle-Head-Teaching Jig Caution Dange r Warning EJ…
Press [Production]. Select the stage to teach.
Press [ESC].
Press [Yes]. Press [Yes].
* The machine parameters are saved automatically when returning to
the main menu.
12-Nozzle Head Teaching
Remarks
13
Item
mounting.
Press [ESC].
Press [Production] to start teaching. * Change double-sided tape for each
Press [Mount position].
14
15
Machinery Part Replacement
Press [Mount pos teach].
• After board recognition is
finished, plug in the light box
and turn on the light.
• When mounting starts, cycle
stop is displayed
automatically.
• When both mounting and
recognition are finished,
return to the main menu and
remove the board and the
light box. The teaching is
finished.
Caution
• To reset an error screen:
Stage A ⇒ Select Tables 1 and
2 and reset the screen.
Stage B ⇒ Select Tables 3 and
4 and reset the screen.
EJM8A-E-SMA051111-A01-00
Page 5-11-11-5
Machinery Part Replacement
This sections lists the differences between 12-nozzle-head and 8-nozzle-head teaching jigs.
Tools
None
Jig
12-Nozzle Head Teaching
5-11-12 12-Nozzle-Head-Teaching Jig
Caution
Dange
r
Warning
EJM8A-E-SMA051112-A01-00
Page 5-11-12-1
Machinery Part Replacement
Remarks
List of differences between 12-nozzle-head and 8-nozzle-head teaching jigs
12-Nozzle Head Teaching
1
Item
R
e
f
e
r
e
n
ce
n
o
zzl
e
pos
i
t
i
o
n f
o
r
eac
h h
ead
8-nozzle head
12-nozzle head No. 5
No. 3
12ノズル
手順書
基板認識
カメ
ラ
XY
軸原点オ
フセ
ッ
幅調整軸原点オフセット
基板位置決め実装高さ
面補正
吸着位置
照明光量
ノズ
ルチ
ェ
ンジャ
実装位置
(ヘッドカメラ調整)
130ノズル
8ノズル用5穴治
130Sノズル
(同一作業)
130ノズル
50 治具
130Sノズル
他同一治具使用
面補正治具使用
同一治具使用
130ノズル
吸着位置ティーチ治具
130Sノズル
他同一治具使用
透過・反射治具ノズル使
130Sノズル
8ノズル用ティーチ治具
130Sノズル
12ノズル用ティーチ治具
130ノズル
8ノズル用ティーチ治具
110・205ノズル使用
110S・205Sノズル
他同一治具使用
Share
同一治具使用
Item
8 nozzles
12 nozzles
Board recog camera XY-axis origin offset
Z-axis origin offset
Chip recog camera θ-axis origin offset
Width adjusting axis origin offset
Board positioning mounting height
XY plane calibration
Pickup position
Light intensity
Nozzle changer
Mount position
(Head camera adjustment)
Nozzle 13
0
8-nozzle 5-hole jig
Jig 50
Nozzle 130
XY Plane calibration jig
Pickup position teaching jig
Nozzle 130
The others: the same jig
Nozzle 130S
The others: the same jig
Nozzle 130S
12-nozzle teaching jig
Nozzle
Nozzle 110S and 205S
The others: the same jig
The same jig
The same jig
8-nozzle teaching jig
Nozzle 130
Shadow & Direct nozzle jig
Nozzles 110 & 205
12-nozzle 5-hole jig
Nozzle 130
S
(The same adjustment)
12-
manual
Share
Share
Available
Available
Available
Available
Available
Available
Available
EJM8A-E-SMA051112-A01-00
Page 5-11-12-2