CM602all_EJM8AESM_Service Manual - 第731页
Optional Accessory Parts Replacement This section describes the procedures for replacing the high-speed nozzle changer. ・ Tools Phillips screwdriver #2 Short Phillips screwdriver #2 Allen key 3 mm Allen key 5 mm Pipe Nip…
Optional Accessory Parts Replacement
Remarks
Item
Nozzle Changer Unit (8-nozzle type)
Lock the valve.
5-000017
Allen key 2.5 mm
Screw M3 2 pcs.
Connect the air tubes and the connectors.
5-000036
Put the feeder cover back on.
Phillips screwdriver #2
Screw M4 2 pcs.
Switch on the main power and air supply.
5
6
7
8
1
2
EJM8A-E-SMA060102-A01-00
Page 6-1-2-3
Optional Accessory Parts Replacement
This section describes the procedures for replacing the high-speed nozzle changer.
・Tools
Phillips screwdriver #2
Short Phillips screwdriver
#2
Allen key 3 mm
Allen key 5 mm
Pipe
Nipper
Dial gauge
Magnetic stand
Iron plate
・Jigs
FM-0655：
Nozzle changer teaching
jig
Nozzle 120 or 130
Nozzle Changer Unit (8-nozzle type)
6-1-3 Nozzle Changer Replacement (High-Speed Machines)
Caution
Dange
r
Warning
Assembly/Adjustment
15 Min.
Teaching
5 Min.
Removal/Disassembly
15 Min.
Total
35
Part
kg
EJM8A-E-SMA060103-A01-00
Page6-1-3-1
Optional Accessory Parts Replacement
Remarks
Switch off the main power.
Turn the switch left.
Close the cock of the MR unit.
After closing the cock, turn the regulator
left to remove air.
* Left gauge: Forcible blow
Middle gauge: Bulk air
Right gauge: Main air
From 0.49MPa
to 0.54MPa
Remove the feeder cover and the chute.
Allen key 3 mm
Phillips screwdriver #2
Screw M4 2 pcs.
Screw M4 x 10mm 3 pcs.
Thick washer 3 pcs.
Remove the right side cover.
Phillips screwdriver #2
Truss screw M4 4 pcs.
Nozzle Changer Unit (8-nozzle type)
3
4
1
Item
2
1
2
EJM8A-E-SMA060103-A01-00
Page6-1-3-2