CM602all_EJM8AESM_Service Manual - 第738页
Remove the feeder cover. Allen key 2.5 mm Round cross-head screw M3 3 pcs. Tools and Specifications Hold the bar shown below changer. Tools and Specifications 4 Item Remarks 2 1 Allen key 2.5 mm Round cross-head screw M3…
Total Time
Weight of
Par
t
20 min. min.
min
.
Kgs.
min.
Removal
Disassembly
A
ssembl
y
Adjustment
Teaching
6-1-4 Slide Cover Replacement (High-Speed Machines)
• Tools
This section describes the procedures for replacing the slide cover for high-speed machines.
Phillips screwdriver #2
Allen key 2.5 mm
Calipers
• Jigs
20
Optional Accessory Parts Replacement Nozzle Changer Unit (8-nozzle type)
40
None
Caution
Danger
Warning
EJM8A-E-SMA060104-A01-00
Page 6-1-4-1
Remove the feeder cover.
Allen key 2.5 mm
Round cross-head screw
M3
3 pcs.
Tools and Specifications
Hold the bar shown below
changer.
Tools and Specifications
4
Item Remarks
2
1
Allen key 2.5 mm
Round cross-head screw
M3
2 pcs.
Tools and Specifications
Remove the screws from the stopper.
Nozzle Changer Unit (8-nozzle type)
Tools and Specifications
Phillips screwdriver #2
Screw M4 2 pcs.
Optional Accessory Parts Replacement
Remove the screws from the nozzle
Replace the slide cover.
3
so as not to let it fall.
EJM8A-E-SMA060104-A01-00
Page 6-1-4-2
Optional Accessory Parts Replacement
Allen key 2.5 mm
Round cross-head screw
M3
3 pcs.
Nozzle Changer Unit (8-nozzle type)
Remarks
8
7
6
5
Tighten the screws on the stopper.
Tighten the screws on the nozzle
changer.
Item
Put the feeder cover back on.
Check the position of the stopper.
Tools and Specifications
Tools and Specifications
Allen key 2.5 mm
Round cross-head screw
M3
2 pcs.
Calipers
When shutter open:
A: 13mm±0.3mm
When shutter closed:
A: 2.5mm±0.3mm
Tools and Specifications
Tools and Specifications
Open Close
A
Apply 0.5-Mpa air pressure to the
cylinder to move the shutter.
Measure Distance A.
EJM8A-E-SMA060104-A01-00
Page 6-1-4-3