CM602all_EJM8AESM_Service Manual - 第741页
Disconnect the connectors from the sensor. 2 1 Remove the feeder cover. Switch off the main power and air supply. Optional Accessory Parts Replacement Phillips screwdriver #2 Screw M4 4 pcs. 4 3 Item Remarks Phillips scr…
A
ssembl
y
A
d
j
ustment
Teaching Total Time
Weight of
Par
t
min.
40
Kgs.
min
.
min.20 min. 20
・Tools
・Jig
Removal
Disassembl
y
6-2-1 Slide Cylinder Replacement (Multi-Purpose Machines)
Optional Accessory Parts Replacement Nozzle Changer Unit (3-nozzle type)
This section describes the procedures for replacing the slide cylinder (for multi-purpose machines).
Phillips screwdriver #2
Allen key 2.5 mm
Allen key 3 mm
Calipers
Wrench 8 mm
Wrench 7 mm
None
Nozzle Changer Unit (3-nozzle type)
6-2
Caution
Danger
Warning
EJM8A-E-SMA060201-A01-00
Page 6-2-1-1
Disconnect the connectors from the
sensor.
2
1
Remove the feeder cover.
Switch off the main power and air supply.
Optional Accessory Parts Replacement
Phillips screwdriver #2
Screw M4 4 pcs.
4
3
Item Remarks
Phillips screwdriver #2
Screw M4 2 pcs.
Remove the right side cover.
Nozzle Changer Unit (3-nozzle type)
1
2
EJM8A-E-SMA060201-A01-00
Page 6-2-1-2
Be careful not to let the screws and
the spacers fall.
Remove the cylinder holding screws.
Remove the cylinders.
Remarks
5
Remove the cylinder air tubes.
8
7
6
Remove the cylinder holding block.
Optional Accessory Parts Replacement
Allen key 2.5 mm
Screw M3 4 pcs.
Allen key 3 mm
Screw M4 10 pcs.
Nozzle Changer Unit (3-nozzle type)
Item
EJM8A-E-SMA060201-A01-00
Page 6-2-1-3