CM602all_EJM8AESM_Service Manual - 第742页
Be careful not to let the screws and the spacers fall. Remove the cylinder holding screws. Remove the cylinders. Remarks 5 Remove the cylinder air tubes. 8 7 6 Remove the cylinder holding block. Optional Accessory Parts …
Disconnect the connectors from the
sensor.
2
1
Remove the feeder cover.
Switch off the main power and air supply.
Optional Accessory Parts Replacement
Phillips screwdriver #2
Screw M4 4 pcs.
4
3
Item Remarks
Phillips screwdriver #2
Screw M4 2 pcs.
Remove the right side cover.
Nozzle Changer Unit (3-nozzle type)
1
2
EJM8A-E-SMA060201-A01-00
Page 6-2-1-2
Be careful not to let the screws and
the spacers fall.
Remove the cylinder holding screws.
Remove the cylinders.
Remarks
5
Remove the cylinder air tubes.
8
7
6
Remove the cylinder holding block.
Optional Accessory Parts Replacement
Allen key 2.5 mm
Screw M3 4 pcs.
Allen key 3 mm
Screw M4 10 pcs.
Nozzle Changer Unit (3-nozzle type)
Item
EJM8A-E-SMA060201-A01-00
Page 6-2-1-3
9
Fit the joints onto the new cylinders.
Wrench 8 mm
Spacer
Joint
10
Put the cylinders on the nozzle holder
section.
11
Fix the cylinders onto the nozzle holder
section.
Allen key 2.5 mm
Screw M3 4 pcs.
12
Put the cylinder holding block back on.
Allen key 3 mm
Screw M4 10 pcs.
Optional Accessory Parts Replacement Nozzle Changer Unit (3-nozzle type)
Item Remarks
EJM8A-E-SMA060201-A01-00
Page 6-2-1-4