CM602all_EJM8AESM_Service Manual - 第755页
Take care with orientation of the slider. Tools and Specifications Replace the slider and lock it. Adjust the stroke. Calipers Wrench 13 mm Flat-head screwdriver #2 When shutter open: A: 15.75±0.25mm B: 0±0.25mm When shu…
6-2-4 Slide Cover Replacement (Multi-Purpose Machines)
Optional Accessory Parts Replacement Nozzle Changer Unit (3-nozzle type)
This section describes the procedures for replacing the slide cover for multi-purpose machines.
Removal
Disassembl
y
A
ssembl
y
A
d
j
ustmen
t
Kgs.
min.
15
min.
Teaching
Phillips screwdriver #2
Flat-head screwdriver #2
Allen key 2.5 mm
Wrench 13 mm
Calipers
10 min.
• Tools
• Jigs
5 min.
Total Time
None
Weigh
t
o
f
Part
Caution
Danger
Warning
EJM8A-E-SMA060204-A01-00
Page 6-2-4-1
Take care with orientation of the slider.
Tools and Specifications
Replace the slider and lock it.
Adjust the stroke.
Calipers
Wrench 13 mm
Flat-head screwdriver #2
When shutter open:
A: 15.75±0.25mm
B: 0±0.25mm
When shutter closed:
A: 0±0.25mm
B: 15.75±0.25mm
Remove the nozzle changer slider holding screw
s
Tools and Specifications
3
Item Remarks
Allen key 2.5 mm
Screw M3 4 pcs.
4
2
1
Optional Accessory Parts Replacement
Remove the feeder cover.
Phillips screwdriver #2
Screw M4 2 pcs.
Allen key 2.5 mm
Screw M3 4 pcs.
Nozzle Changer Unit (3-nozzle type)
Tools and Specifications
B
A
Adjust
here.
EJM8A-E-SMA060204-A01-00
Page 6-2-4-2
5
Put the feeder cover back on.
Phillips screwdriver #2
Screw M4 2 pcs.
Tools and Specifications
Optional Accessory Parts Replacement Nozzle Changer Unit (3-nozzle type)
Item Remarks
EJM8A-E-SMA060204-A01-00
Page 6-2-4-3