CM602all_EJM8AESM_Service Manual - 第785页

Remark Item Component-Thickness-Measuring Unit Option Part and Accessory Replacement Fit the am p lifier-holdin g bolt. ( 2 ) Fit the am p lifier-holdin g bolt. ( 3 ) Phillips screwdriver #2 Screw M4 Insert the CNs39 and…

100%1 / 1093
Remark
Item
Component-Thickness-Measuring Unit
Option Part and Accessory Replacement
Check the value of the amplifier.
Pre
p
are the holdin
g
bolts.
Fit the am
p
lifier-holdin
g
bolt.
(
1
)
Phillips screwdriver #2
Screw M4
37
38
39
40
Close the amplifier cover, and finish setting.
()
When everything is all right, close the amplifier cover
and finish setting.
* If no good is found, review the amplifier setting.
Block the light with the filter, and check each value (front and rear)
of the amplifier is 600 or more.
* If a value is less than 600, re-adjust the sensor until the
value is 600 or more.
Loosen the holding bolt until the end
of it does not come out to the
rear side of the bracket.
Press the bolt end of the bracket
against the cables to lock that end.
EJM8A-E-SMA060401-A01-01
Page　6-4-1-12
Remark
Item
Component-Thickness-Measuring Unit
Option Part and Accessory Replacement
Fit the am
p
lifier-holdin
g
bolt.
(
2
)
Fit the am
p
lifier-holdin
g
bolt.
(
3
)
Phillips screwdriver #2
Screw M4
Insert the CNs39 and 40. Secure the cables with cable ties.
41
42
43
Press the other end of
the bracket against the
cables to lock that end.
Move the bracket in
the ↓ direction.
Pressing the bracket in the
↓ direction and against the
amplifier, tighten the bolt.
Securing cable ties
CN39 and 40
EJM8A-E-SMA060401-A01-01
Page　6-4-1-13
Remark
Item
Component-Thickness-Measuring Unit
Option Part and Accessory Replacement
Put the upper head cover back on.
Phillips screwdriver #2
Truss M4 4 pcs.
* Since there are magnets, ensure
safety using a non-magnetic Allen
keys when working on the machine.
Bolts that come with the
cover (Large): 4 pcs.
Bolts that come with the
cover (Small): 2 pcs.
* Non-magnetic Allen key
Put the feeder cover back on.
Allen key 3 mm
Screw M4 4 pcs.
Turn on the
p
ower and air su
pp
l
y
.
Remove the covers (Large)(Small) from the secondary part.
46
47
44
45
1
2
Bolts
(Large)
Cover (Small)
EJM8A-E-SMA060401-A01-01
Page　6-4-1-14