CM602all_EJM8AESM_Service Manual - 第787页
Remark Item Component-Thickness-Measuring Unit Option Part and Accessory Replacement A d j ustment Procedures of Machine parameter teaching Z-axis origin offset Service manual 6-4-3 48 EJM8A-E-SMA060401-A01-01 Page 6-4-1…
Remark
Item
Component-Thickness-Measuring Unit
Option Part and Accessory Replacement
Put the upper head cover back on.
Phillips screwdriver #2
Truss M4 4 pcs.
* Since there are magnets, ensure
safety using a non-magnetic Allen
keys when working on the machine.
Bolts that come with the
cover (Large): 4 pcs.
Bolts that come with the
cover (Small): 2 pcs.
* Non-magnetic Allen key
Put the feeder cover back on.
Allen key 3 mm
Screw M4 4 pcs.
Turn on the
p
ower and air su
pp
l
y
.
Remove the covers (Large)(Small) from the secondary part.
46
47
44
45
1
2
Bolts
(Large)
Cover (Small)
EJM8A-E-SMA060401-A01-01
Page 6-4-1-14
Remark
Item
Component-Thickness-Measuring Unit
Option Part and Accessory Replacement
A
d
j
ustment
Procedures of Machine parameter
teaching
Z-axis origin offset Service manual 6-4-3
48
EJM8A-E-SMA060401-A01-01
Page 6-4-1-15
• Tools
Phillips screwdriver #1
Phillips screwdriver #2
Allen key Long/short
Pipe
Nipper
Wrench Size 6
Special wrench Size 6
Non-magnetic wrench set
• Jigs
Cover Large/Small
FM-1853(1)
Component-height-
detection-sensor-
adjusting power source
FM-1853(2)
Component-thickness-
sensor-light-axis-
adjusting jig
ND filter
N510013050AA
Component-Thickness-Measuring Unit
6-4-2 Component-Thickness-Sensor Replacement (12-Nozzle-Head Specifications)
Preparation: Remove all the nozzles and nozzle holders from the head.
[Caution before replacement] * Since there are magnets, great care must be taken
to ensure safety when working on the machine.
Option Part and Accessory Replacement
This section describes the procedures for replacing the component-thickness sensor (12-nozzle-head spec.).
Special wrench (Size 6)
H-shaped
cut
Dange
r
Warning
Caution
EJM8A-E-SMA060402-A01-01
Page 6-4-2-1