CM602all_EJM8AESM_Service Manual - 第830页
• Tools Phillips screwdriver #2 Allen key Long/Short Wrench 10 mm Wrench 12 mm Nipper • Jigs FM-1962(1) (1. Component-height- detection-sensor- adjusting power box) FM-1962(2) (2. Component-thickness- measuring-unit-ligh…
Remarks
Component-Thickness-Measuring Unit
Item
Option Part and Accessory Replacement
Connect the I/O link cable connector.
37
Connect the amplifier connector.
38
Put the feeder cover back on.
アンプレベル値：２０００以上
Allen key 3 mm
Screw M4 4 pcs.
Turn on the power and air supply.
39
40
1
2
Connect the I/O link cable connector.
Connect the amplifier connector.
EJM8A-E-SMA060404-A01-00
Page 6-4-4-11
• Tools
Phillips screwdriver #2
Allen key Long/Short
Wrench 10 mm
Wrench 12 mm
Nipper
• Jigs
FM-1962(1)
(1. Component-height-
detection-sensor-
adjusting power box)
FM-1962(2)
(2. Component-thickness-
measuring-unit-light-axis-
adjusting jig)
• Necessities
Bushing
KXFB029SA00 (4 pcs.)
Block gauge (10 mm)
Component-Thickness-Measuring Unit
6-4-5 Component-Thickness-Sensor Replacement (8-Nozzle-Head Specifications)
Option Part and Accessory Replacement
This section describes the procedures for replacing the component-thickness sensor (8-nozzle-head spec.).
Bushing Block gauge
Danger
Warning
Caution
FM-1962(1) Component-thickness-measuring-unit-light-axis-
adjusting jig
(1. Component-height-detection-sensor-adjusting power box )
FM-1962(2) Component-thickness-measuring-unit-light-axis-
adjusting jig
(2. Component-thickness-measuring-unit-light-axis-adjusting
j
i
g)
EJM8A-E-SMA060405-A01-00 Page 6-4-5-1
Remark
Turn off the power and air supply.
Remove the feeder cover.
Allen key 3 mm
Screw M4 4 pcs.
Remove the amplifier connector.
Allen key M6
Screw M6 x 60L 2 pcs.
Component-Thickness-Measuring Unit
4
Item
1
Option Part and Accessory Replacement
Remove the component-thickness-sensor unit.
2
3
1
2
Remove the amplifier connector.
Loosen the two M6 x 60L bolts. Remove the unit.
EJM8A-E-SMA060405-A01-00
Page 6-4-5-2