CM602all_EJM8AESM_Service Manual - 第850页
Remarks Option Part and Accessory Replacement Item PCB-Warp-Sensor Unit Turn on the power and air supply. PCB-warp-sensor adjustment Teaching Adjusting the amplifier 0 reference position (0-volt adjustment) Adjusting the…
Remarks
Option Part and Accessory Replacement
Item
PCB-Warp-Sensor Unit
Secure the amplifier cable. - (2)
Connect the amplifier connector.
* Amplifier connector CN13
Put the head upper cover back on.
Phillips screwdriver #2
Truss M4 screw 4 pcs.
Put the feeder cover back on.
Allen key 3 mm
Screw M4 4 pcs.
13
14
15
16
Cable-tie positions
Connect the amplifier connector.
EJM8A-E-SMA060502-A01-01
Page 6-5-2-5
Remarks
Option Part and Accessory Replacement
Item
PCB-Warp-Sensor Unit
Turn on the power and air supply.
PCB-warp-sensor adjustment
Teaching
Adjusting the amplifier 0 reference
position (0-volt adjustment)
Adjusting the slant (span) of amplifier
(+2-volt adjustment)
XY offset teaching
See Section 6-5-5
17
18
1
2
EJM8A-E-SMA060502-A01-01
Page 6-5-2-6
This section describes the procedures for replacing the PCB-warp sensor (8-nozzle head spec.).
• Tools
Phillips screwdriver #1
Phillips screwdriver #2
Allen key Long/short
Pipe
Nipper
• Jigs
Height measuring jig
FM-1964
Installation adjusting jig
FM-1963
Option Part and Accessory Replacemen
t
PCB-Warp-Sensor Unit
6-5-3 PCB-Warp-Sensor Replacement (8-Nozzle-Head Spec.)
FM-1964
FM-1963
Dange
r
Warning
Caution
EJM8A-E-SMA060503-A01-00
Page 6-5-3-1