CM602all_EJM8AESM_Service Manual - 第863页

Remarks Item Option Part and Accessory Replacement PCB-Warp-Sensor Unit Remove the sensor. Wrench M4 CB4-18 (2 pcs.) Install the new sensor. Wrench M4 CB4-18 (2 pcs.) Put the sensor bracket back on. Wrench M4 M4 x 14L (2…

100%1 / 1093
Remarks
Item
Option Part and Accessory Replacement
PCB-Warp-Sensor Unit
Cut off the cable tie. - (1)
Remove the sensor connector.
Cut off the cable tie. - (3)
Remove the sensor bracket.
Wrench M4
M4 x 14L (2 pcs.)
6
5
8
7
Cut off the cable tie.
Turn the sensor connector (to the amplifier)
to the left. Remove the connector.
Cut off the cable tie.
Front
Side
Loosen the two M4x14L bolts.
Remove the bracket.
EJM8A-E-SMA060504-A01-00
Page　6-5-4-3
Remarks
Item
Option Part and Accessory Replacement
PCB-Warp-Sensor Unit
Remove the sensor.
Wrench M4
CB4-18 (2 pcs.)
Install the new sensor.
Wrench M4
CB4-18 (2 pcs.)
Put the sensor bracket back on.
Wrench M4
M4 x 14L (2 pcs.)
10
9
11
Loosen the two special bolts CB4-
18. Remove the sensor.
Install the sensor with two special
bolts CB4-18.
Install the bracket
with two M4x14L bolts.
EJM8A-E-SMA060504-A01-00
Page　6-5-4-4
Remarks
Item
Option Part and Accessory Replacement
PCB-Warp-Sensor Unit
(Caution)
Do not put the cable in the head so that
it is not necessary to remove the PCB-
warp-sensor cable when replacing the
head.
Placing and securing the sensor cable. (AR and BF)
Placing and securing the sensor cable. (AF and BR)
12
13
AR and BF
AF and BR
Put the cable through the upper
board and to the front left.
Tie the cable along
with the LED-light
and the head-camera
cables behind the
bracket.
Aligning the cable with the
grease tube, tie the cable and
the tube with a cable tie.
Put the cable through the air
j
oint, and connect it to the
amplifier.
Put the cables behind the amplifier, and to the front left.
Tie the cable along
with the LED-light
and the head-camera
cables behind the
bracket.
Put the cable through the air
j
oint, and connect it to the
amplifier.
Aligning the cable with the
grease tube, tie the cable and
the tube with a cable tie.
EJM8A-E-SMA060504-A01-00
Page　6-5-4-5