CM602all_EJM8AESM_Service Manual - 第890页
7-1-2 Shuttle Tray Pickup Position Teaching Shuttle Tray Tray • T his section describes the procedures for teaching the shuttle tray pickup position Total Part Weight Assembly/Adjustment ・ Tools ・ Jigs Min. 0 0 Pickup po…
Precisely position the transfer head
and the shuttle head.
See Teaching sections.
28
Press [Offset set].
Offset range: -3.5 to 3.5
Details:
Shuttle Tray Teaching
27
as necessary.
Align the shuttle head sensor LED with the hole of the jig, using the inching keys
26
determine the key rsps.
Key rsps:
0.01, 0.10, 1.00
According to how much the shuttle head is out of place,
25
Key rsps:
0.01, 0.10, 1.00
Carry out the "Delivery position" teaching.
Item Remarks
Tray Shuttle Tray
Unlock switch
Inching keys
EJM8A-E-SMA070101-A01-00
Page 7-1-1-8
7-1-2 Shuttle Tray Pickup Position Teaching
Shuttle TrayTray
• This section describes the procedures for teaching the shuttle tray pickup position
Total Part Weight
Assembly/Adjustment
・Tools
・Jigs
Min.
00
Pickup position adjustment
jig
Nozzle jig
Removal/Disassembly
7
None
Teaching
Min. Min. kgs.
7
Min.
Dange
r
Warning
Caution
EJM8A-E-SMA070102-A01-00
Page 7-1-2-1
Item
3
4
The shuttle head checks
the holes of the jig, and
corrects the pickup position
automatically.
Remove the sheet from the transfer section.
Carry out the machine parameter teaching.
Select [Shuttle]. Press [Pick pos teach].
Press [Offset set].
Offset range:
-5.000 to 5.000
Remarks
Mount the jig.
Tray Shuttle Tray
2
1
EJM8A-E-SMA070102-A01-00
Page 7-1-2-2