CM602all_EJM8AESM_Service Manual - 第894页
・ Jigs Removal/Disassembly Min. Phillips screwdriver #2 Flat-head screwdriver #2 Allen key 3 mm Feeler gauge 20 Part Weight 7-1-3 Positioning the Magazine Stopper Shuttle Tray Tray This section describes the procedures f…
Offset range: -5.0 to 5.0
10
11
12
Press [Offset set].
Key rsps:
0.01, 0.10, 1.00
Item Remarks
9
Select [Tray side].
Press [Pick pos teach].
Tray Shuttle Tray
Offset for Tray palette
pickup position
Align the shuttle head sensor LED with the holes of the palette extension,
using the inching keys as necessary.
According to how much the shuttle head or the transfer head is out of place,
determine the key rsps.
Unlock switch
Inching keys
EJM8A-E-SMA070102-A01-00
Page 7-1-2-4
・Jigs
Removal/Disassembly
Min.
Phillips screwdriver #2
Flat-head screwdriver #2
Allen key 3 mm
Feeler gauge
20
Part Weight
7-1-3 Positioning the Magazine Stopper
Shuttle TrayTray
This section describes the procedures for positioning the magazine stopper.
Total
Min.
FM-0545: Assembly jig
FM-0558: Palette jig
・Tools
Assembly/Adjustment
kgs.
65
Min.
30 15
Min.
Teaching
FM=055
FM=054
Dange
r
Caution
Warning
EJM8A-E-SMA070103-A01-00
Page 7-1-3-1
Leave both the upper and the
lower springs contracted.
2
1
Item
3
4
Allen key 3 mm
Phillips screwdriver #2
M4 x 8L 8 pcs.
M4 x 10L Truss 2 pcs.
Rotate the eccentric pin so that the spring remain contracted.
Tray Shuttle Tray
Open the side cover.
Remarks
Press [Return to origin].
Phillips screwdriver #2
Allen key 3 mm
Screw M4 2 pcs.
Remove the top cover.
EJM8A-E-SMA070103-A01-00
Page 7-1-3-2