CM602all_EJM8AESM_Service Manual - 第895页
Leave both the upper and the lower springs contracted. 2 1 Item 3 4 Allen key 3 mm Phillips screwdriver #2 M4 x 8L 8 pcs. M4 x 10L Truss 2 pcs. Rotate the eccentric pin so that the spring remain contracted. Tray Shuttle …
・Jigs
Removal/Disassembly
Min.
Phillips screwdriver #2
Flat-head screwdriver #2
Allen key 3 mm
Feeler gauge
20
Part Weight
7-1-3 Positioning the Magazine Stopper
Shuttle TrayTray
This section describes the procedures for positioning the magazine stopper.
Total
Min.
FM-0545: Assembly jig
FM-0558: Palette jig
・Tools
Assembly/Adjustment
kgs.
65
Min.
30 15
Min.
Teaching
FM=055
FM=054
Dange
r
Caution
Warning
EJM8A-E-SMA070103-A01-00
Page 7-1-3-1
Leave both the upper and the
lower springs contracted.
2
1
Item
3
4
Allen key 3 mm
Phillips screwdriver #2
M4 x 8L 8 pcs.
M4 x 10L Truss 2 pcs.
Rotate the eccentric pin so that the spring remain contracted.
Tray Shuttle Tray
Open the side cover.
Remarks
Press [Return to origin].
Phillips screwdriver #2
Allen key 3 mm
Screw M4 2 pcs.
Remove the top cover.
EJM8A-E-SMA070103-A01-00
Page 7-1-3-2
7
8
Raise the lift axis.
Once the adjustment is complete,
Rotate the eccentric pins so that the
Tray Shuttle Tray
6
Mount the jig on the lift.
RemarksItem
remove the jig.
Phillips screwdriver #2
Allen key 3mm
Screw M4 2 pcs.
shaft is aligned with the jig as shown below:
5
Press the jig
against the
linear rails.
The shaft should touch the
j
ig slightly.
0
FM-0545
EJM8A-E-SMA070103-A01-00
Page 7-1-3-3