CM602all_EJM8AESM_Service Manual - 第906页
Phillips screwdriver #2 Nipper Cut off the cable ties on the right side. 5 Allen key 4 mm Screw M5 2 pcs. Be careful not to let the cables be caught. Phillips precision screwdriver Connector screws Open the front cover. …
2
1
90578
Remarks
Power down the machine.
Phillips precision
screwdriver
Connector screw
Item
Shuttle Tray
Phillips screwdriver #2
Screw M4 4 pcs.
Remove all connectors from the front board.
Remove the connector from the right side of the box.
3
4
Tray
Remove the front and the side covers from the control box.
EJM8A-E-SMA070105-A01-00
Page 7-1-5-2
Phillips screwdriver #2
Nipper
Cut off the cable ties on the right side.
5
Allen key 4 mm
Screw M5 2 pcs.
Be careful not to let the
cables be caught.
Phillips precision
screwdriver
Connector screws
Open the front cover.
Cut off the front cable ties.
Item
Shuttle Tray
Remarks
Remove the box holding screws.
Pull out the box. Remove the driver connectors.
6
7
8
Tray
Remove the connectors.
EJM8A-E-SMA070105-A01-00
Page 7-1-5-3
Fix the box and the cable in place.
Allen key 4 mm
Screw M5 2 pcs.
MR-J2-20A-N26
Connect all driver connectors.
Install the box.
Be careful not to let the
cable be caught.
Phillips precision
screwdriver
Connector screws
Phillips precision
screwdriver
Connector screws
9
Remove the relay connectors and the
driver holding screws.
Phillips precision
screwdriver
Connector screws
10
11
12
Tray
Install the driver. Connect the relay connectors.
Shuttle Tray
Item Remarks
EJM8A-E-SMA070105-A01-00
Page 7-1-5-4